Na h-Eileanan Siar · Scotland
Bath re-enamelling & resurfacing in Marybank, Na h-Eileanan Siar
Bath re-enamelling for Marybank, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A coloured bath you want in white
About our bath re-enamelling in Marybank
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It typically takes one visit, with the bath ready to use the following day. Whether it’s stains that won’t shift and enamel that’s lost its shine and feels rough, we can help, whatever the material.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Where
- Marybank (HS2, HS1)
- County
- Na h-Eileanan Siar
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Marybank
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
You may need us if you’ve spotted any of these:
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
- Wear marks under the taps
- A coating lifting around the plughole
Comparing quotes
- Whether the price is fixed and includes VAT
- How long it needs to cure
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
When we would advise against a repair
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly.
Materials we work on in Marybank
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Getting ready for the visit
- Have a window or extractor fan available
- Keep a parking space free if you can
- Tell us about parking, stairs or access
Ask for a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Related advice
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Your questions about bath re-enamelling in Marybank
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Marybank.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Prices and what affects them
Prices start from £350. There’s no charge for travel to Marybank. The price comes down to:
- What kind of damage it is
- Unusual colours or finishes
- The material and finish
- Access to the area
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Quotes from your photos
Phone photos are fine. Make sure they show:
- Details of any past repairs
- Natural light rather than flash
- One picture of the entire bath
- A close-up of the damage, in focus
Most clients in Marybank get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Other services in Marybank
About Marybank
Marybank is about 1 mile west of Stornoway, in Na h-Eileanan Siar. We visit homes and businesses in Marybank and the surrounding area, so nothing has to leave your home. Marybank is one of 87 places in Na h-Eileanan Siar we cover.
Jobs in HS2 and HS1 are booked in the same way as anywhere else. We regularly work on streets such as Bennadrove Road, Airidhean Ur and Macgregor Park and the roads around them. Nearby, we also work in Laxdale (1 mile north-east), Stornoway (1 mile east), Newmarket (1 mile north-east), Plasterfield (2 miles east) and Sandwick (2 miles east). Some remote addresses need extra planning, so call us to arrange it.
What’s near Marybank
Our customers here include homes close to Nicolson Institute and the streets around them. Further afield, we also cover the area around Museum Nan Eilean (1 mile south-east) and Western Isles Hospital (1.3 miles east). For a walk, there is Loch Àirigh na Lic and Ben Barvas.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- No need to remove anything
- Fixed prices from your photos
- Repair technicians who travel to you, UK-wide
- Most jobs done in one visit
Read our prices page or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
