Fife · Scotland
Bath re-enamelling & resurfacing in Maryburgh, Fife
Bath re-enamelling for Maryburgh, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
About our bath re-enamelling in Maryburgh
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Whether it’s enamel that’s lost its shine and feels rough and a period or roll-top bath worth keeping, we can help, on acrylic baths, cast iron baths and Victorian roll-tops alike.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Where
- Maryburgh (KY4)
- Area hub
- Fife
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for most of the day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
How to get a price
Email us a picture of the damage and one of the whole item, with your KY4 postcode, and we’ll reply with a fixed quote.
Advice
Signs you need bath re-enamelling in Maryburgh
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is typically as strong as ever.
It’s worth getting a quote if you see:
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- Stains that won’t shift
Comparing quotes
- A fixed quote, and whether VAT is included
- What preparation is included
- How long the guarantee is and what it covers
- Who turns up on the day
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Store bottles off the bath
- Don’t use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
When we would advise against a repair
To be straight with you, some problems need a different fix:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Landlord and trade work in Maryburgh
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Questions from Maryburgh
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we’ll plan for it.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- How hard the colour is to match
- The type of damage
- Doing more than one item at once
- Previous DIY repairs that have to come out
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
You can generally get a fixed price without us visiting. To make it quick:
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Details of any past repairs
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why Maryburgh clients choose us
- Nothing taken out or refitted
- No extra charge for your area
- Colour-matched on site
- Technicians who travel to you, UK-wide
Read our prices page or bath cost comparison.
Where we work around Maryburgh
Maryburgh is about 6 miles north of Dunfermline, in Fife. Our technicians come to customers in Maryburgh, so you do not need to take anything anywhere. Maryburgh is one of 133 towns and villages in Fife where we work. Our jobs stretch from Maryburgh to Edinburgh (about 16 miles away).
Postcode districts we cover here: KY4. Neighbouring places we cover include Keltybridge (1 mile south-east), Kelty (1 mile south), Crosshill (3 miles east), Lochore (3 miles east) and Ballingry (3 miles north-east). Larger places within reach include Dunfermline (6 miles south), Kirkcaldy (9 miles east), Glenrothes (9 miles east), Leven (15 miles east), Cowdenbeath (3 miles south-east) and Dysart (10 miles east).
Near you in Maryburgh
Typical jobs here are in homes near Parish Church. For rail, the closest station is Lochgelly station, about 3.1 miles east. Well-known places in the area include Queen Margaret Hospital (4.8 miles south) and Lathalmond Railway Museum (3.4 miles south-west). For a walk, there’s Loch Leven National Nature Reserve and Benarty Hill.
Also near Maryburgh
Also in Maryburgh
About our accreditations · Every repair comes with a one-year guarantee.
