Aberdeen · Scotland
Bath re-enamelling & resurfacing in Marywell, Aberdeen
Full bath re-enamelling and resurfacing at your home in Marywell, with a one-year guarantee on every repair.
- Resurfacing from £350
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
What affects the price in Marywell
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- How many areas need work
- How hard the colour is to match
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Your postcode, so we can check dates
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- Details of any past repairs
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
About our bath re-enamelling in Marywell
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. We are often asked to fix a peeling or bubbling previous coating and staining under the taps and around the waste, on cast iron baths, basins & shower trays and pressed steel baths.
All our work comes with a one-year guarantee, wherever you are in Aberdeen.
- Where
- Marywell (AB12)
- County
- Aberdeen
- Cover
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Marywell
Also in Marywell
Common questions in Marywell
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What we are called out for in Marywell
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
You may need us if you’ve spotted:
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
What your quote should include
- What the guarantee covers, and for how long
- How long it needs to cure
- Aftercare advice
- What prep work is covered
Repair or replace in Marywell?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Prices start from £350. We charge the same wherever you are, with no extra for Marywell. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
- Repair technicians who travel to you, UK-wide
Take a look at our prices page or resurfacing vs replacement cost guide.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Clean with a soft cloth and mild detergent
- Don’t use the bath until it has fully cured
- Have chips seen to early
- A quick wipe after use keeps limescale away
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
When a repair is not the answer
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- A metal bath with a through crack
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Marywell
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Landlords, agents and businesses in Marywell
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Open a window if you can
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
Ask for a price
Most customers in Marywell get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Marywell and nearby
Marywell is about 5 miles south of Aberdeen, in Aberdeen. Across the AB12 area, we carry out the work at your property. Marywell is one of 63 towns and villages in Aberdeen we cover.
We cover every part of the AB12 postcode area and the streets around it. That includes homes on Wellington Drive, Checkbar Gardens and Bothiebrigs Drive and the roads around them. Close by, we cover Findon (1 mile south), Portlethen (2 miles south-west), Badentoy Park (2 miles south-west), Portlethen Village (2 miles south) and Cammachmore (3 miles south-west). Larger places within reach include Aberdeen (5 miles north), Rosemount (4 miles north), Berryden (5 miles north), Ferryhill (4 miles north), New Aberdeen (4 miles north) and Dyce (9 miles north).
Near you in Marywell
Locally, our jobs take us to homes close to Portlethen Academy, among other places. The nearest railway station is Portlethen station, roughly 1.7 miles south of the centre. A little further out are Pitfoddels Castle (2.6 miles north-west) and Blairs College (3.1 miles west). Green spaces nearby include Blue Hill and Loirston Loch.
About our accreditations · Every repair comes with a one-year guarantee.
