Warwickshire · England
Bath Re-enamelling for Maxstoke homes
Full bath re-enamelling and resurfacing at your home in Maxstoke, with a one-year guarantee on every repair.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
How we handle bath re-enamelling in Maxstoke
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Common call-outs are for lots of chips and rust spots and brown or grey marks that don’t clean off, in basins & shower trays, pressed steel baths and cast iron baths.
Every repair comes with our one-year guarantee, wherever you are in Warwickshire.
- Location
- Maxstoke (B46)
- Area hub
- Warwickshire
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Maxstoke
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why us?
- Free fixed quotes from pictures
- A year’s guarantee on all work
- Generally one visit, start to finish
- Colour-matched on site
Read our prices page or resurfacing vs replacement cost guide.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs straight away
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Maxstoke and the surrounding area
Maxstoke is about 7 miles west of Bedworth, in Warwickshire. Wherever you are in the B46 postcode area, we come to you. Maxstoke is one of 324 places in Warwickshire we cover. You can also see our page for Birmingham, about 10 miles away.
Postcode districts we cover here: B46. You’ll find streets such as Church Lane and Packington Lane. Other places close to Maxstoke include Kinwalsey (2 miles south-east), Newtown (2 miles north-east), Chapel Green (2 miles south-east), Hollyberry End (3 miles south-east) and Meriden (3 miles south). Further out, we also cover Nuneaton (8 miles east), Warwick (14 miles south), Royal Leamington Spa (14 miles south), Bedworth (7 miles east), Leamington Spa (14 miles south) and Kenilworth (10 miles south).
What’s near Maxstoke
We visit homes around Church of St Michael and All Angels and The Coleshill School, among other places. Maxstoke’s nearest station is Coleshill Parkway station, about 3.4 miles north-west. Other landmarks nearby include Maxstoke Castle (1.6 miles north-west) and Brooklands Hospital (3.8 miles west). For a walk, there’s Ladywalk Reserve.
FAQs for Maxstoke
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Honest limits
It helps to know what we cannot do:
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow most of the day, and we’ll keep you posted as we go.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
How to get a price
Most clients in Maxstoke get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Nearby places to Maxstoke
Also in Maxstoke
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
What affects the price in Maxstoke
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- What the surface is made of
- Where the damage is and how we get to it
- The size and number of damaged areas
- Previous DIY repairs that have to come out
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Any details about the material
- One sharp close-up of the damage
- Natural light rather than flash
- A picture taken from further back
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Do you need bath re-enamelling in Maxstoke?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
You may need us if you’ve spotted:
- A bath that stays dull however much you clean it
- Brown or grey marks that don’t clean off
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
Comparing quotes
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the photos show
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.
