Coventry · England
Bath re-enamelling & resurfacing in Meriden, Coventry
We travel to Meriden for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
How to get a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will say immediately if a repair is the right fix.
Related advice
Bath re-enamelling in Meriden, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our technicians work on cast iron baths, pressed steel baths and Victorian roll-tops, and the jobs we see most are an original cast iron bath that needs restoring and lots of chips and rust spots.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Meriden (CV7)
- Area hub
- Coventry
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- The type of damage
- Previous DIY repairs that have to come out
- How much damage there is
- Access to the area
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Any details about the material
Send us a picture of the damage and a wider shot of the entire item, and tell us you’re in Meriden, and we will come back with a fixed quote.
Your questions about bath re-enamelling in Meriden
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What areas do you cover?
The entire UK, including all of Coventry. Just include your postcode and we will confirm dates.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
What we can’t put right
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think.
Materials we work on in Meriden
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Covering Meriden
Meriden is about 6 miles west of Coventry, in Coventry. Our repair technicians come to homes and businesses in Meriden and nearby villages, so there’s no workshop to go to. Meriden is one of 88 towns and villages in Coventry where we work. Our jobs stretch from Meriden to Birmingham (about 11 miles away).
We cover every part of CV7 and the streets around it. We regularly work on streets such as Alspath Road, Fairfield Rise and The Croft and the roads around them. You’ll find Meriden on the B4104, which makes it straightforward to reach. Neighbouring places we cover include Eaves Green (1 mile east), Four Oaks (1 mile south), Millison's Wood (2 miles east), Kinwalsey (2 miles north-east) and Berkswell (2 miles south). We also work in nearby towns such as Coventry (6 miles east), Hillfields (6 miles east), Bishopsgate Green (6 miles east), Radford (6 miles east), Ernesford Grange (8 miles east) and Foleshill (7 miles east).
Landmarks near Meriden
Typical jobs here are in homes near The Bull's Head Hotel, Meriden Church of England Primary School and Church of St Lawrence and the streets around them. The closest station to Meriden is Hampton-In-Arden station, about 2.4 miles west. A little further out are Allesley Castle (3.8 miles east) and Berkswell Village Museum (2 miles south).
Signs you need bath re-enamelling in Meriden
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
You may need us if you’ve spotted any of these:
- A bath in a colour that no longer suits
- Stains that won’t shift
- Thin, worn enamel in places
- A coating lifting around the plughole
What your quote should include
- Whether they match the colour on site
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
- Is the price fixed, and does it include VAT?
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Repair or replace: which is better?
A replacement frequently means several trades over several days. Resurfacing takes one technician and usually a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Meriden. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- No need to remove anything
- Same prices wherever you are
- Free fixed quotes from pictures
- Colour mixed on the day to match
See our full price list and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Nearby places to Meriden
Other services in Meriden
About our accreditations · Every repair comes with a one-year guarantee.
