Surrey · England

Bath Re-enamelling for Mayford homes

Full bath re-enamelling and resurfacing at your home in Mayford, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Mayford

When we would advise against a repair

Before booking, it’s worth knowing the limits:

  • Damage hidden under a previous coating, until it’s stripped back
  • Leaks from fittings rather than the bath
  • A poorly supported acrylic bath, until it’s firmed up

Send us pictures and we’ll tell you honestly before booking.

Surfaces we repair

  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays

Bath re-enamelling in Mayford, done in place

Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Nothing is disconnected or removed. We regularly repair Victorian roll-tops, acrylic baths and pressed steel baths, and the jobs we see most are brown or grey marks that don’t clean off and a roll-top that’s seen better days.

All our work comes with our one-year guarantee.

Technician in a mask working on a freestanding roll-top bath
Area
Mayford (GU22)
Region
Surrey
Cover
One year on every repair
Quote
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026

Repair or replace: which is better?

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.

What you get with us

  • One price list for the whole UK
  • We will tell you if it’s not worth repairing
  • A year’s guarantee on all work
  • No need to remove anything

See our pricing and resurfacing vs replacement cost guide.

Mayford: your questions answered

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. It can add a little time, which we include in the quote.

Will there be fumes?

Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.

Are there extra charges for Mayford?

We don’t add a call-out fee. Your fixed quote includes everything.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Can you resurface a pink bath in white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What your bath is made of matters

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Get any chip repaired quickly
  • Stick to gentle, non-abrasive cleaners
  • Fix dripping taps quickly
  • Keep toiletries on a shelf rather than in the bath

Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Signs you need bath re-enamelling in Mayford

Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.

Look out for any of the following:

  • A dull, rough surface that won’t come clean
  • A roll-top that’s seen better days
  • A peeling or bubbling previous coating
  • Chips and rust in more than one place

Before you book anyone

  • What aftercare is recommended
  • If travel is included in the price
  • Who will actually do the work
  • How long it needs to cure

Choosing a repair company

What we do, step by step

Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow most of the day. Before we go, we’ll explain when it can be used and how to look after it.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Preparing for the visit

  • Point us to the nearest place to park
  • Tell us about parking, stairs or access
  • Plan for the room to be out of bounds to pets and children

Get a quote

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.

Get a free quote

Read more

DIY repairs versus a professional job

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Work for landlords and builders

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Mayford and nearby

Mayford is about 1 mile south of Woking, in Surrey. From the centre of Mayford to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 395 towns and villages in Surrey, from the larger towns to small villages. We work right across the region, from Mayford to London (about 25 miles away).

Our visits in GU22 are booked in the same way as anywhere else. We regularly work on streets such as Moor Lane, Egley Road and Bonsey Lane and the roads around them. Nearby, we also work in Pyle Hill (1 mile south-west), Sutton Green (1 mile south), Send (2 miles east), Jacobs Well (2 miles south) and Send Marsh (2 miles east). Further out, we also cover Guildford (3 miles south), Camberley (7 miles west), Epsom (13 miles east), Farnham (12 miles south-west), Ewell (14 miles east) and Egham (9 miles north).

What’s near Mayford

We visit homes around Hoe Valley School, St Mark's Church and Drumming Snipe pub. Nearby too are Westfield Primary School (less than half a mile north), Mayford Meadows (less than half a mile north-west) and Hoe Valley School (under half a mile north-west). The nearest railway station is Worplesdon station, roughly 0.9 miles south-west. A little further out are The Peacocks (1.7 miles north) and Woking Community Hospital (1.4 miles north). Open spaces near Mayford include Pewley Hill and Papercourt Marshes.

Map of Mayford © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.