Suffolk · England
Bath Re-enamelling for Maypole Green homes
Full bath re-enamelling and resurfacing at your home in Maypole Green, with a one-year guarantee on every repair.
- Resurfacing from £350
- A coating lifting around the plughole
- Wear marks under the taps
About our bath re-enamelling in Maypole Green
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our repair technicians work on basins & shower trays, Victorian roll-tops and pressed steel baths, and people most often call us about an original cast iron bath that needs restoring and lots of chips and rust spots.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Maypole Green (IP13)
- County
- Suffolk
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Maypole Green and the surrounding area
Maypole Green is about 14 miles north of Kesgrave, in Suffolk. Wherever you are in the IP13 postcode area, we come to you. We work in all 731 towns and villages in Suffolk. Our nearest city page is London, about 80 miles away.
Our visits in IP13 are booked in the same way as anywhere else. Other places close to Maypole Green include Dennington (1 mile east), Saxtead Bottom (1 mile south-west), Capon's Green (1 mile east), Brabling Green (2 miles south-east) and Apsey Green (2 miles south). Larger places within reach include Stowmarket (15 miles west), Kesgrave (14 miles south), Woodbridge (11 miles south), Diss (12 miles north-west), Needham Market (14 miles south-west) and Bungay (14 miles north).
Landmarks near Maypole Green
Typical jobs here are in homes near Dennington Church of England Primary School, St Mary's Church and Thomas Mills High School. Further afield, we also cover the area around Lanman Museum (2.3 miles south) and Hartismere Rural District (3 miles north-west). Green spaces nearby include Framlingham Mere.
Maypole Green: your questions answered
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
How do I get a price for bath re-enamelling in Maypole Green?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you quote from photos?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Landlords, agents and businesses in Maypole Green
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For anyone letting property in or around Maypole Green, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Maypole Green. The price depends on:
- The material and finish
- Where the damage is and how we get to it
- How many items we do on one visit
- Any earlier repairs that need removing first
We charge the same wherever you are, with no extra for Maypole Green. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
What a repair can’t fix
Before booking, it’s worth knowing the limits:
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
- A bath split right through the body
Send us photos and we will tell you honestly.
What we work on
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Looking after it afterwards
Aftercare is simple:
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
- Don’t leave a chip unrepaired
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Also near Maypole Green
Also in Maypole Green
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Related advice
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the next day. Prices start from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- CHAS and Constructionline accredited
- A year’s guarantee on all work
- No extra charge for your area
- Rooms protected and left tidy
See our prices page or resurfacing vs replacement cost guide.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
About our accreditations · Every repair comes with a one-year guarantee.
