Carmarthenshire · Wales
Bath Re-enamelling for Meinciau homes
Fixed-price bath re-enamelling in Meinciau and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- Several chips and rust patches
Our work in Meinciau
Meinciau is about 7 miles south-east of Carmarthen, in Carmarthenshire. Anywhere in SA17, a technician comes to you. Meinciau is one of 195 places in Carmarthenshire where we work.
All of SA17 is within our area, from the main roads to the quietest streets. Nearby, we also work in Four Roads (1 mile south-west), Pont-iets (1 mile south), Pont Henri (1 mile south-east), Crwbin (2 miles north) and Pontyates (2 miles south-west). We also work in nearby towns such as Llanelli (7 miles south-east), Carmarthen (7 miles north-west), Llanelli Rural (7 miles south-east), Bigyn (7 miles south-east), Wern (7 miles south-east) and Ammanford (10 miles east).
Near you in Meinciau
We visit homes around Black Horse pub, among other places. Meinciau’s nearest station is Kidwelly station, roughly 4.6 miles south-west of the centre. Nearby you will also find Mynydd Mawr Hospital (5.2 miles east) and Castell y Domen (2 miles north-west). Green spaces nearby include Bryncoch.
About our bath re-enamelling in Meinciau
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We are frequently asked to fix brown or grey marks that don’t clean off and chips and rust in more than one place, on pressed steel baths, cast iron baths and acrylic baths.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Meinciau (SA17)
- Area hub
- Carmarthenshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the next day.
Before we arrive
- Tell us about parking, stairs or access
- Open a window if you can
- Avoid using the area for a few hours before we arrive
Getting a price
Upload pictures of the damage and a wider shot of the whole item, and tell us you’re in Meinciau, and we’ll come back with a fixed quote.
Advice
For landlords and businesses
For anyone letting property in or around Meinciau, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
We carry out planned and one-off repairs for housing associations and facilities teams in Carmarthenshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Repair or replace in Meinciau?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
- Colour mixed on the day to match
- One visit for most repairs
See our prices page and guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Doing more than one item at once
- The material
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your photos
Good photos mean an accurate price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- One picture of the entire bath
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Your questions about bath re-enamelling in Meinciau
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you redo someone else’s repair?
Generally, yes. The old repair comes out first, so let us know about it.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How much does bath re-enamelling cost in Meinciau?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Honest limits
To be straight with you, some problems need a different fix:
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we will tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Nearby places to Meinciau
Other services in Meinciau
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
How to look after the repair
Once the work has cured, treat it gently:
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
