North Yorkshire · England
Bath re-enamelling & resurfacing in Melsonby, North Yorkshire
Full bath re-enamelling and resurfacing for homes and businesses in Melsonby and across North Yorkshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- An old resurfacing that’s failing
Landlord and trade work in Melsonby
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
About our bath re-enamelling in Melsonby
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Whether it’s a bath that stays dull however much you clean it and several chips and rust patches, we can usually put it right, whatever the material.
Every job is backed for twelve months in Melsonby and everywhere else. If something goes wrong with the work, we come back.
- Location
- Melsonby (DL10)
- Region
- North Yorkshire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Repairing versus replacing in Melsonby
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Melsonby clients choose us
- Technicians who travel to you, UK-wide
- Most jobs done in one visit
- We leave the room as we found it
- Colours mixed by hand to suit your surface
Take a look at our pricing or bath cost comparison.
What a repair can’t fix
We will not take on work that won’t last, so here’s what a repair can’t put right:
- A bath that is rusted through
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Melsonby: your questions answered
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
Do you cover Melsonby?
Yes. We work across the UK and travel to Melsonby and the rest of North Yorkshire. Send us photos for a fixed quote, or call 0345 017 0787.
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across North Yorkshire.
Do you cover the entire of North Yorkshire?
All of North Yorkshire, and the rest of the UK. There is no extra charge for travel.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Also near Melsonby
Also in Melsonby
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Unusual colours or finishes
- How much damage there is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- One picture of the whole bath
- One sharp close-up of the damage
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. Allow a full day, and we’ll tell you if anything changes.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Don’t use the bath until it has fully cured
- Don’t leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
- Clean with a soft cloth and mild detergent
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About Melsonby
Melsonby is about 6 miles north of Catterick Garrison, in North Yorkshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Melsonby is one of 626 towns and villages in North Yorkshire where we work. You can also see our page for Newcastle upon Tyne, about 36 miles away.
Postcode districts we cover here: DL10. We regularly work on streets such as St James Close, Glebe Court and Scots Dyke Close. Close by, we cover Aldbrough St John (2 miles north), Hartforth (2 miles south-west), Barton (2 miles east), Gilling West (2 miles south-west) and Middleton Tyas (2 miles south-east). Larger places within reach include Catterick Garrison (6 miles south), Northallerton (14 miles south-east), Richmond (4 miles south), Colburn (6 miles south), Bedale (13 miles south) and Romanby (14 miles south-east).
Landmarks near Melsonby
In Melsonby, that means homes near Black Bull pub, St James' Church and Melsonby Methodist Primary School and the streets around them. Nearby you’ll also find Victoria Hospital (4.7 miles south) and Rock Castle (1.6 miles south-west).
About our accreditations · Every repair comes with a one-year guarantee.
