North Yorkshire · England
Bath Re-enamelling in Romanby
We travel to Romanby for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Brown or grey marks that don’t clean off
Bath re-enamelling in Romanby, done in place
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Common call-outs are for thin, worn enamel in places and enamel that’s lost its shine and feels rough, across acrylic baths, pressed steel baths and Victorian roll-tops.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Romanby (DL7)
- Area hub
- North Yorkshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
- Do not leave a chip unrepaired
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- A fixed quote before booking
- One-year guarantee on every repair
- Same prices wherever you are
- Nothing taken out or refitted
Read our full price list or guide to resurfacing and replacement costs.
Do you need bath re-enamelling in Romanby?
Frequently the bath has just had decades of use. The body of the bath is generally perfectly sound.
Typical reasons for a call-out include:
- Thin, worn enamel in places
- Brown or grey marks that don’t clean off
- A roll-top that is seen better days
- Several chips and rust patches
Comparing quotes
- What preparation is included
- Who will actually do the work
- When it can be used again
- If travel is included in the price
Landlords, agents and businesses in Romanby
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
For anyone letting property in or around Romanby, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
More services for Romanby
About Romanby
Romanby is about 1 mile south-west of Northallerton, in North Yorkshire. Clients in Romanby get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover all 626 towns and villages across North Yorkshire, from the larger towns to small villages. We work right across the region, from Romanby to Leeds (36 miles away).
All of DL7 is covered. Local streets include Hambleton Avenue, Poplar Crescent and Harewood Chase. With the B1333 close by, Romanby is easy for our repair technicians to reach. Neighbouring places we cover include Northallerton (1 mile north-east), Yafforth (2 miles north-west), Ainderby Steeple (2 miles west), Morton-on-Swale (2 miles west) and Brompton (2 miles north). Further out, we also cover Ripon (14 miles south), Catterick Garrison (11 miles west), Richmond (13 miles north-west), Thirsk (8 miles south-east), Colburn (10 miles west) and Stokesley (14 miles north-east).
Landmarks near Romanby
Around Romanby, we work in homes near The Nags Head pub, Church of St James the Great and Northallerton College, among other places. There is a railway station in Romanby itself: Northallerton station. Well-known places in the area include Friarage Hospital (1.2 miles north-east) and Sigston Castle (3.7 miles north-east).
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- How many items we do on one visit
- Unusual colours or finishes
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
You can take the photos on your phone, there is no need for anything special. Make sure they show:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- A picture taken from further back
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
What we do, step by step
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. You can expect it to take most of the day, and we will keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
Get a quote
Send us pictures of the damage and one of the entire item, and tell us you’re in Romanby, and we’ll come back with a fixed quote.
Related advice
Romanby: your questions answered
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you quote from photos?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you fix a peeling bath coating?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you work in Romanby?
Yes, we do. Technicians travel to Romanby from across the region, with no extra charge for travel.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
About our accreditations · Every repair comes with a one-year guarantee.
