Dorset · England
Bath re-enamelling & resurfacing in Merley, Dorset
Fixed-price bath re-enamelling in Merley and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How we handle bath re-enamelling in Merley
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for a bath in a colour that no longer suits and a bath that stays dull however much you clean it, across Victorian roll-tops, pressed steel baths and cast iron baths.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Merley (BH21)
- County
- Dorset
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Merley
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Nearby places to Merley
Also in Merley
What happens on the day
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take most of the day.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the next day.
How to prepare
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
Ask for a price
To get a price, send a couple of photos using our quote form or ring us. We’ll say right away if a repair is the right fix.
Related advice
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- A quick wipe after use keeps limescale away
- Don’t leave a chip unrepaired
- Store bottles off the bath
- Don’t let dyes or oils sit on the finish
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
When a repair isn’t the answer
A repair is not right for every job, including:
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
- A bath that is rusted through
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Where we work around Merley
Merley is about 1 mile south of Wimborne Minster, in Dorset. Anywhere in BH21, we carry out the work at your property. We work in 462 places in Dorset, from the larger towns to small villages.
We cover every part of the BH21 postcode area. We regularly work on streets such as Merley Lane, Matilda Close and Huntingdon Drive. We also travel to Canford Magna (1 mile north-east), Knighton (2 miles east), Little Canford (2 miles north-east), Broadstone (2 miles south-west) and Bearwood (2 miles south-east). Further out, we also cover Christchurch (10 miles east), Blandford Forum (10 miles north-west), Verwood (8 miles north-east), Ferndown (4 miles north-east), Swanage (12 miles south) and Highcliffe (12 miles east).
Landmarks near Merley
Our clients here include homes close to Merley First School, The Lantern and Corfe Hills School, among other places. The closest station to Merley is Parkstone (Dorset) station, about 4.3 miles south of the centre. A little further out are Stapehill Abbey (2.4 miles north-east) and Alderney Hospital (2.6 miles south-east). The countryside around Merley includes Stoney Down.
Common problems we fix in Merley
Often the bath has just had decades of use. The body of the bath is generally perfectly sound.
Typical reasons for a call-out include:
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
Questions to ask before you book
- How your room will be protected
- Whether cleaning and preparation are in the price
- Aftercare advice
- Whether the price is fixed and includes VAT
Landlords, agents and businesses in Merley
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- Nothing taken out or refitted
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- Rooms protected and left tidy
Read our prices page and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
