Kent · England
Bath Re-enamelling for Mersham homes
Damaged bath in Mersham? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Chips and rust in more than one place
Bath re-enamelling in Mersham, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Typical jobs include a peeling or bubbling previous coating and a coloured bath you want in white, in basins & shower trays, pressed steel baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Mersham (TN25)
- Region
- Kent
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
About Mersham
Mersham is about 3 miles south-east of Ashford, in Kent. Across the TN25 area, we come to you. We cover 922 places across Kent. You can also see our page for London, about 52 miles away.
Here we cover the TN25 postcode area. You’ll find streets such as Church Road, The Street and Church Close, and we cover them all. Other places close to Mersham include Sevington (1 mile north-west), South Stour (1 mile south-west), Ridgeway (1 mile east), Hinxhill Park (2 miles north) and Smeeth (2 miles east). Within a short drive, we also cover Ashford (3 miles north-west), Canterbury (13 miles north-east), Folkestone (11 miles east), Faversham (14 miles north), Hythe (7 miles south-east) and Davington (14 miles north).
Landmarks near Mersham
Typical jobs here are in homes near The Farriers Arms, Mersham Primary School and Poulton Wood and the streets around them. Mersham’s nearest station is Ashford International station, about 2.9 miles north-west of the centre. Well-known places in the area include Ashford Designer Outlet (2.6 miles north-west) and William Harvey Hospital (1.7 miles north-west). Green spaces nearby include Hatch Park.
When to call us in Mersham
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
People normally call us after spotting one of these:
- A peeling or bubbling previous coating
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
- Worn patches where water runs and sits
Before booking anyone
- How your room will be protected
- What the guarantee covers, and for how long
- How to care for the finish
- What prep work is covered
Questions from Mersham
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
How do I get a price for bath re-enamelling in Mersham?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Is there a guarantee?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
What affects the price in Mersham
Prices start from £350. Prices are worked out job by job. The main factors are:
- Whether we combine several jobs
- Where the damage is and how we get to it
- How much damage there is
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
When you take your pictures, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- One picture of the entire bath
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Towns and villages near Mersham
Other services in Mersham
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Don’t use the bath until it has fully cured
- Keep suction mats out of the bath
- Store bottles off the bath
- A dripping tap should be fixed promptly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Honest limits
Before you book, it’s worth knowing the limits:
- Problems we cannot see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
How it works
Arrival times are agreed in advance. Once we’re there, the work takes the best part of a day for most jobs. The room is left tidy and you will know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Ensure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
