Kent · England
Bath Re-enamelling for South Stour homes
Bath re-enamelling in South Stour without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Several chips and rust patches
- A period or roll-top bath worth keeping
Bath re-enamelling in South Stour, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with an original cast iron bath that needs restoring and a coloured bath you want in white, we can typically put it right, whatever the material.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- South Stour (TN25)
- Region
- Kent
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
South Stour and the surrounding area
South Stour is about 3 miles south-east of Ashford, in Kent. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. South Stour is one of 922 places in Kent where we work. We work right across the region, from South Stour to London (51 miles away).
Every address in TN25 is covered. If you are just outside South Stour, we cover Mersham (1 mile north-east), Sevington (2 miles north), Hinxhill Park (2 miles north), Ridgeway (3 miles north-east) and Hinxhill (3 miles north-east). Within a short drive, we also cover Ashford (3 miles north-west), Canterbury (14 miles north-east), Folkestone (11 miles east), Faversham (14 miles north), Hythe (8 miles east) and Davington (15 miles north).
Local landmarks in South Stour
Locally, our jobs take us to homes close to Poulton Wood and Finberry Primary School, among other places. For rail, the closest station is Ashford International station, roughly 2.8 miles north-west of the centre. Well-known places in the area include William Harvey Hospital (2.4 miles north) and Ashford Designer Outlet (2.3 miles north-west). For a walk, there is Hatch Park.
What we cannot put right
A repair is not right for every job, for example:
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Repair or replace in South Stour?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
- Straight answers about what a repair can do
- Generally one visit, start to finish
Take a look at our prices page or bath cost comparison.
What happens on the day
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
- Let us know which floor the room is on
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Related advice
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
South Stour questions
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Is there any odour?
Expect a mild smell while we are working.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What areas do you cover?
Everywhere in the UK, South Stour included. There is no extra charge for travel.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Are there extra charges for South Stour?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Don’t let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Send the address, photos and access details.
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to South Stour. The price depends on:
- How many areas need work
- Previous DIY repairs that have to come out
- The material
- Access to the area
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- A photo taken from further back
- The material, if you know it
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
For a price in South Stour, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Also in South Stour
About our accreditations · Every repair comes with a one-year guarantee.
