Lancashire · England
Bath re-enamelling & resurfacing in Middleton, Lancashire
Local bath re-enamelling for Middleton: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
Bath re-enamelling in Middleton, done in place
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Whether it’s a coating lifting around the plughole and chips and rust in more than one place, we can help, on acrylic baths, cast iron baths and Victorian roll-tops alike.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Area
- Middleton (LA3)
- Area hub
- Lancashire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Middleton
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Look out for any of the following:
- A roll-top that’s seen better days
- A coloured bath you want in white
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
What your quote should include
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the photos show
- If travel is included in the price
- Who will actually do the work
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Repair or replace: which is better?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Colour-matched on site
- Same prices wherever you are
- Rooms protected and left tidy
- Every repair guaranteed for a year
Read our pricing or guide to resurfacing and replacement costs.
Also near Middleton
More services for Middleton
Your questions about bath re-enamelling in Middleton
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Which areas do you work in?
We cover the whole UK, including Middleton and the rest of Lancashire. Send your postcode with your pictures and we’ll offer you dates.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before booking.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes most of the day, and we will keep you posted as we go.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
Getting a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Leave the bath for the full curing time before using it
- Do not leave a chip unrepaired
- Do not let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About Middleton
Middleton is about 2 miles south of Heysham, in Lancashire. Jobs in Middleton are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Middleton is one of 482 places in Lancashire we cover. We work right across the region, from Middleton to Liverpool (about 42 miles away).
Jobs in LA3 are booked in the same way as anywhere else. That includes homes on Carr Lane, Mill Hill Grove and Hall Grove and the roads around them. Neighbouring places we cover include Overton (1 mile east), Heaton (2 miles north-east), Heysham (2 miles north), Sandylands (3 miles north) and Abraham Heights (3 miles north-east). We also work in nearby towns such as Lancaster (4 miles north-east), Morecambe (3 miles north-east), Fleetwood (9 miles south-west), Thornton (11 miles south-west), Poulton-le-Fylde (13 miles south) and Cleveleys (11 miles south-west).
Near you in Middleton
Our customers here include homes close to Trumacar Nursery and Community Primary School and The Old Roof Tree Inn and the streets around them. The closest station to Middleton is Heysham Port station, roughly 1.4 miles north-west. Well-known places in the area include Cottage Museum (3.9 miles north-east) and Lancaster Castle (3.8 miles north-east).
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- What the surface is made of
- Access to the area
- How many areas need work
- Previous DIY repairs that have to come out
Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- What it’s made of, if you know
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
