Dorset · England

Bath Re-enamelling in Miles Cross

Bath re-enamelling across Miles Cross and nearby, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • Wear marks under the taps
  • Staining under the taps and around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Miles Cross

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Bath re-enamelling at your home in Miles Cross

Most baths are re-enamelled in a day, and you can use the bath the next day. Nothing is disconnected or removed. Typical jobs include an original cast iron bath that needs restoring and wear marks under the taps, on cast iron baths, basins & shower trays and Victorian roll-tops.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Miles Cross (DT6)
County
Dorset
Warranty
A year, on every repair
Quotes
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

What happens on the day

Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a full day. Before we go, we’ll explain when it can be used and how to care for it.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Point us to the nearest place to park
  • Tell us if there are stairs or a lift

How to get a price

The quickest way to a price is to send a couple of photos through our quote form or ring us. We will tell you honestly whether it can be repaired.

Send photos for a quote

Read more

Do you need bath re-enamelling in Miles Cross?

Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is usually perfectly sound.

Customers generally contact us about:

  • Staining under the taps and around the waste
  • Thin, worn enamel in places
  • A bath that stays dull however much you clean it
  • A coating lifting around the plughole

What your quote should include

  • How long the guarantee is and what it covers
  • Aftercare advice
  • Who turns up on the day
  • Whether they match the colour on site

Our hiring checklist

What bath re-enamelling costs

Resurfacing from £350. You will not pay by the hour. The price is based on:

  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off
  • How easy the damage is to reach
  • What the surface is made of

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

How to get a fixed price

Most quotes are done from pictures alone. To make it quick:

  • The material, if you know it
  • Something in shot to show the size
  • Good light, ideally daylight, without flash glare
  • A wider photo showing the whole bath

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

How to care for the repair

It’s all simple stuff, just a few sensible habits:

  • A quick wipe after use keeps limescale away
  • Wash away dyes and oils after use
  • Don’t leave bottles, razors or sponges standing on the surface
  • Never use suction bath mats

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.

Miles Cross and nearby

Miles Cross is about 1 mile west of Bridport, in Dorset. From the centre of Miles Cross to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Miles Cross is one of 462 towns and villages in Dorset we cover.

Here we cover the DT6 postcode area. Local streets include West Road and Duck Street, and we cover them all. Other places close to Miles Cross include Symondsbury (1 mile north), Allington (1 mile east), Lower Eype (1 mile south), Atrim (1 mile north) and Eype Mouth (1 mile south). Larger places within reach include Dorchester (15 miles east), Lyme Regis (7 miles west), Chickerell (15 miles south-east), Beaminster (6 miles north), Broadwey (15 miles east) and Charminster (14 miles east).

What’s near Miles Cross

Around Miles Cross, we work in homes near Symondsbury Parish Church (St John the Baptist), Symondsbury Church of England Voluntary Aided Primary School and The Sir John Colfox Academy, among other places. Well-known places in the area include Bridport Community Hospital (0.9 miles north-east) and Chideock and Seatown Museum (1.7 miles west). For a walk, there’s Thorncombe Beacon.

Map of Miles Cross © OpenStreetMap contributors

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • A bath that is rusted through
  • Problems we can’t see until an old finish comes off
  • A bath split right through the body

Send us photos and we will tell you honestly before you book.

Materials we repair

  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths

Repair or replace in Miles Cross?

For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Why us?

  • Colour-matched on site
  • CHAS and Constructionline accredited
  • Straight answers about what a repair can do
  • Most jobs done in one visit

See our pricing and guide to resurfacing and replacement costs.

FAQs for Miles Cross

How do I book?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Are there extra charges for Miles Cross?

There’s no separate call-out charge. Your fixed quote includes everything.

Which areas do you work in?

We work UK-wide, and that includes Miles Cross. Our prices are the same everywhere.

Is there a guarantee?

Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.

Do you need to take the bath out?

No. It’s re-enamelled where it stands, so the tiles and taps stay put.

Is there a smell?

Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Landlord and trade work in Miles Cross

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Landlords, letting agents and housing providers in Miles Cross use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.