Surrey · England
Bath re-enamelling & resurfacing in Mill Lane, Surrey
Local bath re-enamelling for Mill Lane: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Chips and rust in more than one place
FAQs for Mill Lane
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Surrey.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Bath re-enamelling in Mill Lane without replacing anything
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We are often asked to fix chips and rust in more than one place and enamel that’s lost its shine and feels rough, on cast iron baths, basins & shower trays and acrylic baths.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Area
- Mill Lane (GU10)
- County
- Surrey
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Also near Mill Lane
Other services in Mill Lane
Signs you need bath re-enamelling in Mill Lane
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Keep an eye out for these signs:
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
- An old resurfacing that is failing
- A bath in a colour that no longer suits
Comparing quotes
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
- How your room will be protected
- Who will actually do the work
Where we work around Mill Lane
Mill Lane is about 2 miles south-west of Fleet, in Surrey. Our repair technicians come to homes and businesses in Mill Lane, so there’s no workshop to go to. Mill Lane is one of 395 places in Surrey we cover. You can also see our page for London, about 38 miles away.
Here we cover the GU10 postcode area. Whether you live on Bowenhurst Lane and Aquarius Close or anywhere nearby, we can come to you. We also travel to Bowling Alley (1 mile south-east), Crondall (1 mile south), Redlands (1 mile south-east), Dogmersfield (1 mile north) and Crookham Village (2 miles north). Further out, we also cover Guildford (13 miles east), Woking (14 miles east), Camberley (9 miles north-east), Farnham (4 miles south-east), Frimley (8 miles north-east) and Haslemere (13 miles south-east).
Near you in Mill Lane
Around Mill Lane, we work in homes near St Nicholas' School, Basingbourne Park and The Exchequer pub. You’ll also find Court Moor School (1.9 miles north-east) and Old Church of All Saints (1.1 miles north-west). The nearest railway station is Winchfield station, roughly 3 miles north-west of the centre. Nearby you’ll also find Museum of Farnham (3.8 miles south-east) and Powderham Castle (2.4 miles south). Open spaces near Mill Lane include Tundry Hill and Dogmersfield Lake.
The process
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a full day, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
Get a quote
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
What a repair cannot fix
We will not take on work that will not last, so these are the limits:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Landlord and trade work in Mill Lane
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Repairing versus replacing in Mill Lane
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Why us?
- Same prices wherever you are
- Technicians who travel to you, UK-wide
- Every repair guaranteed for a year
- Free fixed quotes from pictures
Read our prices page and guide to resurfacing and replacement costs.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
What bath re-enamelling costs
Prices start from £350. We price every job individually, from your photos. What matters most is:
- How hard the colour is to match
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Send photos for a quote
We price nearly every job from pictures. This is what to send:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- A clear, close picture of the problem area
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
