Hampshire · England
Bath Re-enamelling for Dogmersfield homes
Damaged bath in Dogmersfield? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Bath re-enamelling in Dogmersfield, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Common call-outs are for an old resurfacing that’s failing and chips and rust in more than one place, across cast iron baths, basins & shower trays and pressed steel baths.
All our work is covered by our one-year guarantee, wherever you are in Hampshire.
- Location
- Dogmersfield (RG27)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Dogmersfield
Also in Dogmersfield
Honest limits
In fairness, there are a few things a repair will not fix:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Dogmersfield and the surrounding area
Dogmersfield is about 2 miles west of Fleet, in Hampshire. Wherever you are in the RG27 postcode area, a technician comes to you. We cover 683 places across Hampshire. Our jobs stretch from Dogmersfield to London (37 miles away).
We work across the RG27 postcode area and the streets around it. Other places close to Dogmersfield include Crookham Village (1 mile east), Winchfield Hurst (1 mile north-west), Mill Lane (1 mile south), Fleet (2 miles east) and Bowling Alley (2 miles south). Further out, we also cover Basingstoke (10 miles west), Farnborough (5 miles east), Aldershot (5 miles east), Alton (9 miles south-west), Yateley (5 miles north) and Tadley (13 miles north-west).
Local landmarks in Dogmersfield
Around Dogmersfield, we work in homes near Calthorpe Park School, The Exchequer pub and All Saints' Church, among other places. You’ll also find Calthorpe Park (1.3 miles north-east) and Dogmersfield Church of England Primary School (within half a mile north). The closest station to Dogmersfield is Winchfield station, about 1.7 miles north-west of the centre. Further afield, we also cover the area around Hart Shopping Centre (1.8 miles north-east) and Fleet Community Hospital (1.8 miles north-east). The countryside around Dogmersfield includes Tundry Hill and Fleet Pond Nature Reserve.
What affects the price in Dogmersfield
Prices start from £350. We charge the same across the UK, including Dogmersfield. The price reflects:
- The material
- The colour and finish to match
- The type of damage
- Where the damage is and how we get to it
Our prices are the same across the UK, with no extra for Dogmersfield. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
You can usually get a fixed price without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- The material, if you know it
- Details of any past repairs
- The postcode, so we can plan the visit
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why Dogmersfield customers choose us
- Most jobs done in one visit
- Fixed prices from your photos
- Rooms protected and left tidy
- Every repair guaranteed for a year
Take a look at our full price list or bath cost comparison.
How to care for the repair
Most damage we see is avoidable. These habits help:
- Do not let dyes or oils sit on the finish
- Never use suction bath mats
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Landlords, agents and businesses in Dogmersfield
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
What we do, step by step
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
- Keep children and pets away from the room on the day
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Advice
Common questions in Dogmersfield
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
How much does bath re-enamelling cost in Dogmersfield?
Prices start from £350. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
