Essex · England
Bath re-enamelling & resurfacing in Mill Street, Essex
Problem with your bath in Mill Street? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Chips and rust in more than one place
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which typically takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Let us know if it has been repaired before
- Let us know about parking or access
- Let us know which floor the room is on
Get a quote
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
Bath re-enamelling in Mill Street, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We regularly repair Victorian roll-tops, pressed steel baths and basins & shower trays, and the jobs we see most are a bath that stays dull however much you clean it and staining under the taps and around the waste.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Mill Street (CO6)
- Area hub
- Essex
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Mill Street
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
People typically call us after spotting one of these:
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- Enamel that’s lost its shine and feels rough
- A coating lifting around the plughole
Before booking anyone
- Who will actually do the work
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
Mill Street questions
Can I get a quote without a visit?
Generally, yes. Clear pictures let us give you a fixed quote without visiting.
How much does bath re-enamelling cost in Mill Street?
Prices start from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your CO6 postcode.
Can you do the outside of a roll-top?
Yes. Inside and out.
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Essex.
Do you cover Mill Street?
Yes. We cover the whole UK and come to Mill Street and the rest of Essex. Send pictures and we’ll quote, or call 0345 017 0787.
What happens after I send photos?
We review the photos and send a fixed quote with dates.
Our work in Mill Street
Mill Street is about 7 miles east of Sudbury, in Essex. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 644 towns and villages in Essex, from the larger towns to small villages. We work right across the region, from Mill Street to London (about 55 miles away).
All of CO6 is covered, from the main roads to the quietest streets. Local streets include Mill Street and Mill Lane. Nearby, we also work in Whitestreet Green (1 mile north-west), Calais Street (2 miles north-west), Stone Street (2 miles north-west), Hagmore Green (2 miles north-west) and Boxford (2 miles north-west). Larger places within reach include Colchester (8 miles south), Camulodunum (8 miles south), Halstead (12 miles west), Greenstead (8 miles south), Tiptree (14 miles south-west) and Wivenhoe (10 miles south).
Local landmarks in Mill Street
Typical jobs here are in homes near Bells Corner pub, Stoke-by-Nayland Church of England Primary School and Church of St Mary. Other landmarks nearby include Severalls Hospital (5.7 miles south) and Lindsey Castle (4.1 miles north). For a walk, there is Arger Fen.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What affects the price in Mill Street
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- How many areas need work
- Previous DIY repairs that have to come out
- The material and finish
- Where the damage is and how we get to it
We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Daylight if possible, and no flash reflection
- Any details about the material
- Details of any past repairs
- A photo taken from further back
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Nearby places to Mill Street
More services for Mill Street
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Clean with a soft cloth and mild detergent
- Respect the curing time we give you
- Don’t leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Landlord and trade work in Mill Street
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Mill Street, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Repairing versus replacing in Mill Street
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Why choose Surface Doctor in Mill Street
- Most jobs done in one visit
- CHAS and Constructionline accredited
- Colour-matched on site
- Every repair guaranteed for a year
Take a look at our full price list or bath cost comparison.
When a repair is not the answer
We will not take on work that won’t last, so these are the limits:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
