Devon · England
Bath re-enamelling & resurfacing in Milton Abbot, Devon
Problem with your bath in Milton Abbot? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Wear marks under the taps
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
- Make sure the room can be ventilated
Get a quote
Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Milton Abbot, and we’ll reply with a fixed price.
Related advice
About our bath re-enamelling in Milton Abbot
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include a peeling or bubbling previous coating and chips and rust in more than one place, on acrylic baths, pressed steel baths and basins & shower trays.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Milton Abbot (PL19)
- Area hub
- Devon
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Rinse off hair dye, oils and bath bombs right away
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
- Avoid suction-cup mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Milton Abbot and the surrounding area
Milton Abbot is about 6 miles north-west of Tavistock, in Devon. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Milton Abbot is one of 586 towns and villages in Devon we cover.
All of PL19 is covered, from the main roads to the quietest streets. Jobs here include addresses on Fore Street, Lutyens Fold and Venn Hill. Close by, we cover Latchley (4 miles south), Lower Dimson (5 miles south), Dimson (5 miles south), Monkscross (5 miles south) and Middle Dimson (5 miles south). We also work in nearby towns such as Tavistock (6 miles south-east), Okehampton (15 miles north-east), Tiddy Brook Meadows (7 miles south-east), Bere Alston (8 miles south), Horrabridge (9 miles south-east) and Yelverton (10 miles south-east).
Landmarks near Milton Abbot
Our clients here include homes close to Parish Church of St Constantine, Edgcumbe Arms and Milton Abbot School, among other places. Further afield, we also cover the area around Tavistock Hospital (5.4 miles south-east). Green spaces nearby include Hingston Down.
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Milton Abbot. The price depends on:
- Whether we combine several jobs
- How many areas need work
- The colour and finish to match
- How easy the damage is to reach
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
When we would advise against a repair
Before you book, it’s worth knowing the limits too:
- A bath that’s rusted through
- A bath split right through the body
- Plumbing leaks, which need a plumber
Send us pictures and we will tell you honestly.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Milton Abbot questions
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Do you come to Milton Abbot?
Yes. We cover the entire UK and travel to Milton Abbot. Send pictures and we’ll quote, or call 0345 017 0787.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Signs you need bath re-enamelling in Milton Abbot
Hard water speeds up the wear, and abrasive cleaners do the most damage.
These are the problems we’re asked about most:
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
- A roll-top that’s seen better days
What to look for in a quote
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- How your room will be protected
- Aftercare advice
Repairing versus replacing in Milton Abbot
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Fixed prices from your pictures
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
- No need to remove anything
Read our pricing or guide to resurfacing and replacement costs.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Nearby places to Milton Abbot
Also in Milton Abbot
About our accreditations · Every repair comes with a one-year guarantee.
