Cornwall · England

Bath re-enamelling & resurfacing in Latchley, Cornwall

Fixed-price bath re-enamelling in Latchley and the surrounding area, usually in one visit.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Latchley

The process

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. It usually takes most of the day, and you are welcome to carry on with your day while we work.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Keep children and pets away from the room on the day
  • Tell us about any previous repairs or coatings

How to get a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Send pictures for a quote

Related advice

Bath re-enamelling at your home in Latchley

The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s an old resurfacing that’s failing and a coloured bath you want in white, we can usually put it right.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.

Before and after: an old basin refinished to bright white
Location
Latchley (PL18, PL19)
Area hub
Cornwall
Cover
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

Honest limits

A few problems are outside what a surface repair can do:

  • Damage hidden under a previous coating, until it’s stripped back
  • Holes rusted through the metal
  • Leaks from fittings rather than the bath

If in doubt, send photos and we’ll say what we think before booking.

Materials we work on in Latchley

  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays

What affects the price in Latchley

Prices start from £350. You will know the full cost before you book. We take into account:

  • The material and finish
  • The size and number of damaged areas
  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off

Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Send photos for a quote

Almost every job we do is priced from pictures. This is what to send:

  • A clear, close picture of the problem area
  • A wider photo showing the entire bath
  • Something in shot to show the size
  • Any earlier repairs or coatings

Send us photos of the damage and a wider shot of the whole item, with your PL18 postcode, and we’ll reply with a fixed quote.

Why repair rather than replace?

There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

What you get with us

  • Generally one visit, start to finish
  • Every repair guaranteed for a year
  • Colours mixed by hand to suit your surface
  • A fixed quote before you book

See our prices page or resurfacing vs replacement cost guide.

Looking after it afterwards

Much of the damage we repair could have been avoided. These habits help:

  • Keep suction mats out of the bath
  • Rinse off hair dye, oils and bath bombs right away
  • Do not use the bath until it has fully cured
  • Stick to gentle, non-abrasive cleaners

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.

What your bath is made of matters

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

Landlords, agents and businesses in Latchley

We work for landlords, letting agents and housing providers in Latchley as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

FAQs for Latchley

Is there a call-out fee?

We do not add a call-out fee. Your fixed price includes everything.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Which areas do you work in?

Everywhere in the UK, Latchley included. Travel is included in the price.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Do I have to be there?

Someone needs to let us in and show us the job. You do not need to watch us work.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Our work in Latchley

Latchley is about 5 miles west of Tavistock, in Cornwall. Wherever you are in the PL18 postcode area, we carry out the work at your property. Latchley is one of 644 towns and villages in Cornwall where we work.

Our visits in PL18 and PL19 work the same way as everywhere else we cover. We also travel to Dimson (2 miles south-east), Lower Dimson (2 miles south-east), Middle Dimson (2 miles south-east), St Ann's Chapel (2 miles south) and Higher Dimson (2 miles south-east). Within a short drive, we also cover Stonehouse (12 miles south), Saltash (9 miles south), Liskeard (11 miles south-west), Launceston (8 miles north-west), Addington (11 miles south-west) and Torpoint (12 miles south).

Landmarks near Latchley

Our clients here include homes close to The Royal Inn and the streets around them. The closest station to Latchley is Gunnislake station, roughly 2 miles south-east. Well-known places in the area include Kithill Castle (2.7 miles south-west) and Cotehele Mill (3.4 miles south). Open spaces near Latchley include Hingston Down.

Map of Latchley © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.