Gwynedd · Wales
Bath re-enamelling & resurfacing in Minffordd, Gwynedd
Bath re-enamelling in Minffordd without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A roll-top that’s seen better days
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Bath re-enamelling in Minffordd without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We work on basins & shower trays, cast iron baths and Victorian roll-tops, and the jobs we see most are chips and rust in more than one place and a period or roll-top bath worth keeping.
You get a one-year guarantee, the same in Minffordd as everywhere else we work.
- Location
- Minffordd (LL57, LL59)
- County
- Gwynedd
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
Before you book, it’s worth knowing the limits:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- A bath split right through the body
Send us pictures and we’ll tell you honestly.
Materials we work on in Minffordd
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Looking after it afterwards
Once the work has cured, treat it gently:
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
- Repair dripping taps early
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
About Minffordd
Minffordd is about 1 mile south of Bangor, in Gwynedd. Across the LL57 area, we carry out the work at your property. Minffordd is one of 165 places in Gwynedd we cover. We work right across the region, from Minffordd to Liverpool (51 miles away).
Postcode districts we cover here: LL57 and LL59. Nearby, we also work in Glanadda (1 mile west), Bangor (1 mile north), Bryn-llwyd (1 mile west), Coed-mawr (1 mile west) and Maesgeirchen (1 mile north-east). We also work in nearby towns such as Caernarfon (8 miles south-west), Bethesda (4 miles south-east), Gerlan (4 miles south-east), Braichmelyn (4 miles south-east), Llanbeblig (8 miles south-west) and Llanberis (7 miles south).
What’s near Minffordd
Our customers here include homes close to Ysgol Friars, Ysgol Tryfan and St David's Church and the streets around them. You will also find Union Inn (within half a mile west), St Mary's Church (1 mile north) and Alice Williams Memorial Library (0.9 miles north). The closest station to Minffordd is Bangor (Gwynedd) station, roughly 0.5 miles north. Other landmarks nearby include Minffordd Hospital (less than half a mile north-east) and Deiniol (0.7 miles north). The countryside around Minffordd includes Llyn Celanedd and Spinnies Nature Reserve.
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Minffordd. The price reflects:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Send photos for a quote
When you take your pictures, a few simple things make all the difference:
- The material, if you know it
- Details of any past repairs
- Something in shot to show the size
- Where you are, by postcode
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why choose Surface Doctor in Minffordd
- We will tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- No need to remove anything
- One-year guarantee on every repair
See our full price list or guide to resurfacing and replacement costs.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day. We leave the room clean and ready to use once it has cured.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Ensure the room can be ventilated
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Getting a price
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Places near Minffordd
Other services in Minffordd
Common questions in Minffordd
How long is the bath unusable?
Generally one day, with the bath ready the following day. A badly pitted bath can need a second day.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Signs you need bath re-enamelling in Minffordd
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The things clients generally mention when they call are:
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
- Thin, worn enamel in places
- A bath in a colour that no longer suits
What your quote should include
- Whether there are any call-out or travel charges
- What protection goes down before work starts
- How the colour is matched
- When it can be used again
About our accreditations · Every repair comes with a one-year guarantee.
