Kent · England
Bath Re-enamelling for Rushenden homes
Bath re-enamelling across Rushenden and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- One price list for the entire UK
- Free fixed quotes from pictures
- Nothing taken out or refitted
- Colour-matched on site
Take a look at our pricing or resurfacing vs replacement cost guide.
Bath re-enamelling in Rushenden, done in place
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Our technicians work on acrylic baths, pressed steel baths and basins & shower trays, and common reasons people get in touch are a period or roll-top bath worth keeping and worn patches where water runs and sits.
Every repair comes with a one-year guarantee, wherever you are in Kent.
- Where
- Rushenden (ME11)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Rushenden
Other services in Rushenden
How the visit works
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. Allow the best part of a day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
- Ensure the area is dry
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll say straight away if a repair is the right fix.
Related advice
Work for landlords and builders
Landlords, letting agents and housing providers in Rushenden use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
What we’re called out for in Rushenden
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The most common problems we’re called about are:
- Enamel that is lost its shine and feels rough
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Wear marks under the taps
What to look for in a quote
- If travel is included in the price
- A fixed quote, and whether VAT is included
- How the room is protected while they work
- How to look after the finish
Your questions about bath re-enamelling in Rushenden
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Prices and what affects them
Prices start from £350. Prices are worked out job by job. What matters most is:
- What kind of damage it is
- How hard the colour is to match
- Whether we combine several jobs
- How many areas need work
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Any details about the material
- Daylight if possible, and no flash reflection
- One picture of the entire bath
- A close-up of the damage, in focus
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
About Rushenden
Rushenden is about 2 miles south-west of Sheerness, in Kent. Across the ME11 area, a technician comes to you. Rushenden is one of 922 towns and villages in Kent where we work. We work right across the region, from Rushenden to London (about 36 miles away).
Jobs in ME11 are booked in the same way as anywhere else. You’ll find streets such as Well Road, Manor Road and First Avenue, and we cover them all. Close by, we cover Queenborough (1 mile north-east), Halfway Houses (2 miles north-east), Sheerness (2 miles north-east), Blue Town (2 miles north) and Grain (3 miles north). Within a short drive, we also cover Maidstone (14 miles south-west), Sittingbourne (5 miles south), Whitstable (13 miles east), Faversham (9 miles south-east), Minster (3 miles east) and Davington (9 miles south-east).
Near you in Rushenden
Around Rushenden, we work in homes near Queenborough School and Nursery, Parish Church of the Holy Trinity and Old House at Home. The closest station to Rushenden is Queenborough station, about 0.6 miles north-east of the centre. A little further out are Queenborough Guildhall Museum (0.5 miles north) and Castle Rough (3.5 miles south).
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Don’t leave a chip unrepaired
- Leave the bath for the full curing time before using it
- Rinse off hair dye, oils and bath bombs straight away
- Use washing-up liquid and a soft cloth
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
