Northumberland · England
Bath Re-enamelling for Mitford homes
Fixed-price bath re-enamelling in Mitford and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- Staining under the taps and around the waste
About our bath re-enamelling in Mitford
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. Whether it’s a coating lifting around the plughole and worn patches where water runs and sits, we can usually put it right, whatever the material.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Mitford (NE61)
- Area hub
- Northumberland
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Mitford and the surrounding area
Mitford is about 2 miles west of Morpeth, in Northumberland. We visit customers in Mitford and nearby villages, so you don’t need to take anything anywhere. We cover 189 places in Northumberland, from the larger towns to small villages. Our jobs stretch from Mitford to Newcastle upon Tyne (about 13 miles away).
Every address in NE61 is within our area, from the main roads to the quietest streets. If you’re just outside Mitford, we cover Fair Moor (1 mile north-east), Bullers Green (1 mile east), Morpeth (2 miles east), Tranwell Woods (2 miles south) and Hepscott (3 miles east). Larger places within reach include Blyth (9 miles east), Cramlington (8 miles south-east), Ashington (7 miles east), Bedlington (6 miles east), Prudhoe (15 miles south) and Newsham (9 miles south-east).
Near you in Mitford
We visit homes around The Plough Inn, Church of St Mary Magdalene and Morpeth All Saints Church of England Aided First School, among other places. Nearby too are Carlisle Park (1.7 miles east) and The King Edward VI Academy (1.6 miles east). Mitford’s nearest station is Morpeth station, about 2 miles east of the centre. A little further out are Spital Hill (within half a mile north-east) and Morpeth Chantry Bagpipe Museum (1.8 miles east).
Common questions in Mitford
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Northumberland.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Repair or replace: which is better?
A replacement often means several trades over several days. Resurfacing takes one technician and usually a day, with the bath back in use the next day. Prices start from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Mitford clients choose us
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
- One visit for most repairs
Take a look at our pricing or bath cost comparison.
How the visit works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
How we price bath re-enamelling
Prices start from £350. You will not pay by the hour. The price is based on:
- Where the damage is and how we get to it
- How many areas need work
- The material and finish
- Whether old repairs or coatings need taking off
We charge the same wherever you are, with no extra for Mitford. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- Any details about the material
- One picture of the whole bath
- Details of any past repairs
- A coin beside the damage so we can judge size
Send us a photo of the damage and one of the whole item, with your NE61 postcode, and we will reply with a fixed quote.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Looking after it afterwards
Once the work has cured, treat it gently:
- Do not use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
- Store bottles off the bath
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Places near Mitford
What else we do in Mitford
What we can’t put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
