Northumberland · England
Bath Re-enamelling in Fair Moor
Problem with your bath in Fair Moor? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
How it works
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. You can expect it to take most of the day, and we will keep you posted as we go.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Clear the area around the damage
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Get a quote
To get a price, send two or three photos using our quote form or ring us. We will say straight away whether it can be repaired.
Read more
About our bath re-enamelling in Fair Moor
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on acrylic baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are stains that won’t shift and an outdated colour you’d like to change.
All our work is covered by a one-year guarantee.
- Location
- Fair Moor (NE61)
- Region
- Northumberland
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Fair Moor questions
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
How much does bath re-enamelling cost in Fair Moor?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
- Do not use the bath until it has fully cured
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Covering Fair Moor
Fair Moor is about 2 miles north-west of Morpeth, in Northumberland. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Fair Moor is one of 189 places in Northumberland we cover. Our nearest city page is Newcastle upon Tyne, about 14 miles away.
All of NE61 is covered. Local streets include Orchid Crescent, Juniper Court and Aspen Way. If you are just outside Fair Moor, we cover Bullers Green (1 mile south-east), Mitford (1 mile south-west), Morpeth (2 miles south-east), Pegswood (3 miles east) and Longhirst (3 miles east). Further out, we also cover Blyth (9 miles south-east), Cramlington (8 miles south-east), Ashington (6 miles east), Bedlington (6 miles south-east), Newsham (9 miles south-east) and Amble (11 miles north-east).
Near you in Fair Moor
Our clients here include homes close to The King Edward VI Academy, The King Edward VI Academy and Carlisle Park. Fair Moor’s nearest station is Morpeth station, about 1.8 miles south-east. Further afield, we also cover the area around St George's Park (1.2 miles east) and Benridge (0.8 miles west).
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Fair Moor customers choose us
- Same prices wherever you are
- Honest advice, even when it means no job
- Fixed prices from your pictures
- Colour mixed on the day to match
Read our pricing or bath cost comparison.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- Whether we combine several jobs
- The type of damage
- The size and number of damaged areas
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
Most quotes are done from pictures alone. To make it quick:
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
- Your postcode, so we can check dates
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
Send us pictures and we will tell you honestly.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Towns and villages near Fair Moor
What else we do in Fair Moor
Landlord and trade work in Fair Moor
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Do you need bath re-enamelling in Fair Moor?
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
It’s worth getting a quote if you see:
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
What to look for in a quote
- When it can be used again
- What prep work is covered
- What happens if they find more damage
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
