Cheshire East · England
Bath re-enamelling & resurfacing in Moblake, Cheshire East
Problem with your bath in Moblake? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- An old resurfacing that’s failing
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Cheshire East and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Bath re-enamelling in Moblake without replacing anything
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We regularly repair pressed steel baths, basins & shower trays and cast iron baths, and the jobs we see most are a period or roll-top bath worth keeping and brown or grey marks that don’t clean off.
Every repair is covered by a one-year guarantee.
- Location
- Moblake (CW3)
- Region
- Cheshire East
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- How many areas need work
- Doing more than one item at once
- Unusual colours or finishes
- The material and finish
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Phone photos are fine, there is no need for anything special. Just ensure we can see:
- Any details about the material
- A photo taken from further back
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Honest limits
A few problems are outside what a surface repair can do:
- A bath that’s rusted through
- Leaks from fittings rather than the bath
- A metal bath with a through crack
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Questions from Moblake
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Can you repair something that is been repaired before?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes the best part of a day. If we find something your pictures didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Keeping it looking good
Nothing complicated is needed:
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Where we work around Moblake
Moblake is about 6 miles south of Nantwich, in Cheshire East. Our repair technicians come to clients in Moblake, so there’s no workshop to go to. Moblake is one of 254 towns and villages in Cheshire East we cover. We work right across the region, from Moblake to Liverpool (about 34 miles away).
Every address in CW3 is within our area. Nearby, we also work in Chapel End (1 mile south-west), Buerton (1 mile east), Longhill (1 mile north-east), Little Heath (1 mile north-west) and Norton in Hales (3 miles south-east). Within a short drive, we also cover Crewe (8 miles north), Nantwich (6 miles north), Middlewich (14 miles north), Sandbach (12 miles north-east), Coppenhall (8 miles north) and Leighton (9 miles north).
Landmarks near Moblake
We visit homes around St James' Church and Audlem St James' CofE Primary School and the streets around them.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
When to call us in Moblake
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted:
- Wear marks under the taps
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
- Stains that will not shift
Comparing quotes
- Whether the colour is mixed to match
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
- Aftercare advice
Also near Moblake
Other services in Moblake
About our accreditations · Every repair comes with a one-year guarantee.
