Cheshire East · England
Bath re-enamelling & resurfacing in Woore, Cheshire East
Bath re-enamelling for Woore, without a refit. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- An old resurfacing that is failing
How we handle bath re-enamelling in Woore
Most baths are re-enamelled in a day. Nothing is disconnected or removed. We’re frequently asked to fix thin, worn enamel in places and an original cast iron bath that needs restoring, across acrylic baths, pressed steel baths and cast iron baths.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Woore (CW3)
- Region
- Cheshire East
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Woore
Woore is about 6 miles north-east of Market Drayton, in Cheshire East. Jobs in Woore are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our repair technicians cover 254 places across Cheshire East, from the larger towns to small villages. Our jobs stretch from Woore to Manchester (about 35 miles away).
All of CW3 is within our area. Local streets include The Square, London Road and St Leonard's Way, and we cover them all. Close by, we cover Knighton (1 mile south), Bearstone (2 miles south), Napley (3 miles south), Buerton (3 miles west) and Norton in Hales (3 miles south-west). Larger places within reach include Crewe (8 miles north), Congleton (15 miles north-east), Nantwich (8 miles north-west), Middlewich (15 miles north), Sandbach (12 miles north) and Coppenhall (9 miles north).
Around Woore
Locally, our jobs take us to homes close to Church of Saint Leonard and Woore Primary and Nursery School, among other places. A little further out are Heighley Castle (3.7 miles north-east) and Checkley cum Wrinehill (2.7 miles north). Open spaces near Woore include Black Firs and Cranberry Bog.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a full day. The room is left tidy.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the following day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
- Let us know which floor the room is on
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you’re under no obligation.
Advice
Signs you need bath re-enamelling in Woore
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, normally first under the taps and around the waste.
The things clients usually mention when they call include:
- Several chips and rust patches
- An old resurfacing that is failing
- Staining under the taps and around the waste
- A coloured bath you want in white
Questions to ask before you book
- How long the guarantee is and what it covers
- Whether the price covers travel
- Whether a trained technician does the job
- What preparation is included
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for Woore. What changes the price is:
- The colour and finish to match
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- How much damage there is
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- Something in shot to show the size
- One picture of the entire bath
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Also in Woore
FAQs for Woore
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
How long is the bath unusable?
Most baths are done in a day, ready the next day. We will confirm timings when we quote.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a repair cannot fix
Some jobs are not right for a repair, for example:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think.
Materials we work on in Woore
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Landlord and trade work in Woore
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
If you manage property in Woore, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why Woore clients choose us
- A fixed quote before booking
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
Take a look at our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
