Isle of Anglesey · Wales
Bath re-enamelling & resurfacing in Moelfre, Isle of Anglesey
Full bath re-enamelling and resurfacing in Moelfre, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
Signs you need bath re-enamelling in Moelfre
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Send us a picture if you notice any of these:
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
What your quote should include
- Whether they match the colour on site
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
- What prep work is covered
Bath re-enamelling at your home in Moelfre
If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. There is no removal, plumbing or tiling involved. Typical jobs include an outdated colour you’d like to change and chips and rust in more than one place, on acrylic baths, basins & shower trays and pressed steel baths.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Area
- Moelfre (LL72)
- Area hub
- Isle of Anglesey
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
The process
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and we start. You can expect it to take a full day, and we will tell you if anything changes.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Make sure the room can be ventilated
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Advice
Landlord and trade work in Moelfre
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Places near Moelfre
More services for Moelfre
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why choose Surface Doctor in Moelfre
- Most jobs done in one visit
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
- Fixed prices from your pictures
See our prices page or guide to resurfacing and replacement costs.
Aftercare tips
After the repair has cured, a few habits help it last:
- Have chips seen to early
- Avoid suction-cup mats
- Respect the curing time we give you
- Fix dripping taps quickly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What a repair cannot fix
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Common questions in Moelfre
Is repairing better than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Do you cover Moelfre?
Yes. We cover the entire UK and travel to Moelfre. Send photos and we will quote, or call 0345 017 0787.
Are there extra charges for Moelfre?
No. Our quotes include travel, and we charge the same wherever you are.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before you book. We take into account:
- How hard the colour is to match
- How much damage there is
- What the surface is made of
- Previous DIY repairs that have to come out
Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Any details about the material
- Daylight if possible, and no flash reflection
Most clients in Moelfre get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Moelfre and the surrounding area
Moelfre is about 10 miles north-west of Bangor, in Isle of Anglesey. Our repair technicians come to customers in Moelfre, so you don’t need to take anything anywhere. We work in 115 places in Isle of Anglesey. You can also see our page for Liverpool, about 54 miles away.
Our visits in LL72 are booked in the same way as anywhere else. You will find streets such as Rhosffordd, Maes Hyfryd and Ffordd Eleth. Moelfre is on the A5108, so it’s easy for us to reach. Other places close to Moelfre include Marianglas (1 mile south), Nant y Perfedd (1 mile west), Tyn-y-gongl (2 miles south), Benllech (2 miles south) and Llaneugrad (2 miles south-west). Within a short drive, we also cover Llangefni (7 miles south-west), Menai Bridge (9 miles south), Porthaethwy (9 miles south), Amlwch (6 miles north-west), Llanfair Pwllgwyngyll (9 miles south) and Beaumaris (9 miles south-east).
Near you in Moelfre
Typical jobs here are in homes near St Gallgo's Church and Kinmel Arms, among other places. Well-known places in the area include Moelfre RNLI Seawatch Centre (under half a mile east). For a walk, there is Sotherby Top and Llyn Bodafon.
About our accreditations · Every repair comes with a one-year guarantee.
