East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Moor End, East Riding of Yorkshire
Bath re-enamelling in Moor End without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- An old resurfacing that’s failing
- Several chips and rust patches
How we handle bath re-enamelling in Moor End
We don’t move the bath, so your taps, tiles and plumbing are left alone. It normally takes one visit, and can be used again the following day. Typical jobs include an old resurfacing that’s failing and a coloured bath you want in white, in basins & shower trays, cast iron baths and acrylic baths.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Area
- Moor End (YO43)
- County
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Moor End questions
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
What happens next?
You will get a fixed quote back. There’s no obligation to book.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What we cannot put right
To be straight with you, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Common problems we fix in Moor End
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Get in touch if you’ve noticed:
- An original cast iron bath that needs restoring
- Wear marks under the taps
- A coloured bath you want in white
- Lots of chips and rust spots
What to look for in a quote
- What happens if the damage is worse than the pictures show
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
- What protection goes down before work starts
Places near Moor End
What else we do in Moor End
What affects the price in Moor End
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- How many areas need work
- How many items we do on one visit
- Previous DIY repairs that have to come out
- Unusual colours or finishes
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- A wider photo showing the entire bath
- Details of any past repairs
- One sharp close-up of the damage
- Your postcode, so we can check dates
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say immediately whether it can be repaired.
Repair or replace in Moor End?
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Technicians who travel to you, UK-wide
- Same prices wherever you are
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
See our prices page and guide to resurfacing and replacement costs.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Moor End and nearby
Moor End is about 7 miles south of Pocklington, in East Riding of Yorkshire. We visit homes and businesses in Moor End and nearby villages, so you do not need to take anything anywhere. Moor End is one of 299 places in East Riding of Yorkshire we cover. Our jobs stretch from Moor End to Leeds (32 miles away).
We cover every part of YO43 and the streets around it. From Back Lane, Port Royal and Little End or anywhere nearby, a technician can come to you. We also cover the places around Moor End: Sand Hole (1 mile south-west), Holme upon Spalding Moor (1 mile north-west), Rascal Moor (1 mile south-east), High Garth (1 mile south-east) and Water End (1 mile west). Within a short drive, we also cover Beverley (14 miles east), Goole (9 miles south-west), Pocklington (7 miles north), Hessle (15 miles south-east), Cottingham (15 miles east) and Market Weighton (5 miles north-east).
Near you in Moor End
Typical jobs here are in homes near The Blacksmith Arms, Holme-upon-Spalding Moor Primary School and Church of All Saints and the streets around them.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How the visit works
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take a full day, and you can get on with other things while we are there.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Landlords, agents and businesses in Moor End
We carry out planned and one-off repairs for housing associations and facilities teams in East Riding of Yorkshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
