East Riding of Yorkshire · England
Bath Re-enamelling for Rascal Moor homes
Our technicians come to Rascal Moor for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- An old resurfacing that’s failing
How we handle bath re-enamelling in Rascal Moor
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on cast iron baths, Victorian roll-tops and pressed steel baths, and people most frequently call us about a dull, rough surface that won’t come clean and a roll-top that’s seen better days.
Somewhere as small as Rascal Moor, you will find cottages, farmhouses and converted buildings. Many have heavy cast iron baths or baths in awkward spots, and getting a bath out along a lane or up narrow stairs is hard work. Bath re-enamelling in place avoids all of that.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Rascal Moor (YO43)
- Area hub
- East Riding of Yorkshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- Any earlier repairs that need removing first
- How easy the damage is to reach
- How much damage there is
- The type of damage
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
Nearby places to Rascal Moor
Also in Rascal Moor
Signs you need bath re-enamelling in Rascal Moor
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted:
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
- Chips and rust in more than one place
If you let a flat or house near Eastrington station (about 4.7 miles south), we repair baths between tenancies so it’s ready to let again quickly.
Before you book anyone
- Whether they match the colour on site
- How to look after the finish
- A fixed price, and whether VAT is included
- How long the guarantee is and what it covers
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Landlords, agents and businesses in Rascal Moor
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Rascal Moor homes and their baths
Rascal Moor is about 8 miles south of Pocklington, in East Riding of Yorkshire. Our technicians come to homes and businesses in Rascal Moor and the surrounding area, so nothing has to leave your home. Rascal Moor is one of 299 towns and villages in East Riding of Yorkshire we cover. We work right across the region, from Rascal Moor to Leeds (32 miles away).
Here we cover the YO43 postcode area for bath re-enamelling. Nearby, we also carry out bath re-enamelling in Sand Hole (1 mile west), Moor End (1 mile north-west), High Garth (1 mile east), Tollingham (1 mile south-east) and Holme upon Spalding Moor (1 mile north-west). Further out, we also cover Beverley (14 miles east), Goole (9 miles south-west), Pocklington (8 miles north), Hessle (15 miles south-east), Cottingham (14 miles east) and Market Weighton (5 miles north-east).
Around Rascal Moor
The closest station to Rascal Moor is Eastrington station, about 4.7 miles south. For a walk, there’s North Cave Wetlands.
How the visit works
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and the room is left clean and tidy. Somewhere like Rascal Moor needs a little journey planning: tell us about narrow lanes, gates, long drives or where to park. We bring everything needed for the bath re-enamelling, so there’s no second trip.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
When we’d advise against a repair
A repair is not right for every job, including:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
- A bath split right through the body
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Rascal Moor: your questions answered
I let a flat near Eastrington station. Can you help between tenants?
Yes, landlords and agents book us regularly.
Do you come out to small places like Rascal Moor?
Yes, villages and hamlets are part of our area, with the same prices as anywhere else.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can a failed resurfacing be redone?
Typically, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you work in Rascal Moor?
Yes. We cover the whole UK and come to Rascal Moor. Send photos and we’ll quote, or call 0345 017 0787.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across East Riding of Yorkshire.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Stick to gentle, non-abrasive cleaners
- Do not leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Store bottles off the bath
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repair or replace in Rascal Moor?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Replacement in Rascal Moor means trades, travel and waste removal, while a repair is a single visit.
Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- No extra charge for your area
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- Repair technicians who travel to you, UK-wide
See our Prices page And Bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
