Birmingham · England
Bath Re-enamelling in Moor Pool
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Moor Pool. Send photos for a free, fixed quote.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Bath re-enamelling at your home in Moor Pool
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Our technicians work on cast iron baths, acrylic baths and basins & shower trays, and the jobs we see most are a coloured bath you want in white and a bath that stays dull however much you clean it.
All of our repairs are guaranteed for twelve months in Moor Pool and everywhere else. We return to put right any problem with the work.
- Area
- Moor Pool (B17, B15)
- County
- Birmingham
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Moor Pool
Moor Pool is about 2 miles south of Smethwick, in Birmingham. Jobs in Moor Pool are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Moor Pool is one of 140 towns and villages in Birmingham where we work.
Our repair technicians cover all of B17 and B15. From War Lane, Rose Road and Abbey Road or a nearby road, a technician can come to you. We also travel to Harborne (1 mile south-west), Beech Lanes (1 mile west), Bournbrook (1 mile south-east), Edgbaston (1 mile east) and Bearwood (1 mile north-west). Larger places within reach include Birmingham (3 miles east), Royal Sutton Coldfield (9 miles north-east), Erdington (6 miles north-east), Streetly (9 miles north), Hawkesley (4 miles south) and Sparkbrook (3 miles east).
Landmarks near Moor Pool
Locally, our jobs take us to homes close to Harborne Reserve, Harborne Academy and Saint John's Church. Nearby too are The Junction pub (within half a mile south), Harborne Primary School (less than half a mile south-west), Birmingham Blue Coat School (within half a mile east) and St Faith and St Laurence's Church (1 mile west). The closest station to Moor Pool is University (Birmingham) station, roughly 0.8 miles south-east of the centre. Other landmarks nearby include Birmingham Women's Hospital (0.6 miles south-east) and The Museum of Saint John Henry Cardinal Newman (1.2 miles north-east). Not far away are Deer's Leap Wood and Portway Hill.
- Parks and local facilities nearby include Weoley (1.8 miles south-west)
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Your questions about bath re-enamelling in Moor Pool
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Do you cover the whole of Birmingham?
All of Birmingham, and the rest of the UK. Travel is included in the price.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
How much does bath re-enamelling cost in Moor Pool?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your B17 postcode.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you cover Moor Pool?
Yes, we do. Repair technicians travel to Moor Pool from across the region, with no extra charge for travel.
Aftercare tips
Nothing complicated is needed:
- Clean with a soft cloth and mild detergent
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Landlord and trade work in Moor Pool
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Same prices wherever you are
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
- Rooms protected and left tidy
Take a look at our prices page and guide to resurfacing and replacement costs.
Places near Moor Pool
Also in Moor Pool
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a full day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.
Read more
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath split right through the body
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly.
What we work on
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- A picture taken from further back
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- The material, if you know it
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
