Shropshire · England

Bath Re-enamelling in Morda

Our technicians come to Morda for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

Resurfacing from £350
An old resurfacing that is failing
A roll-top that’s seen better days

Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Morda?

Call 0345 017 0787

Get a free quote

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

Bath re-enamelling in Morda, done in place

Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you are dealing with worn patches where water runs and sits and brown or grey marks that don’t clean off, we can help, on pressed steel baths, Victorian roll-tops and cast iron baths alike.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Location: Morda (SY10)
Area hub: Shropshire
Guarantee: One year on every repair
Quotes: From £350. Fixed and free, based on pictures
Phone: 0345 017 0787
Updated: 23 October 2026

Roll-top bath being refinished by a Surface Doctor technician

Looking after it afterwards

How the surface is treated afterwards matters:

Do not use the bath until it has fully cured
Rinse off hair dye, oils and bath bombs immediately
Have chips seen to early
A dripping tap should be fixed promptly

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

How the visit works

Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It normally takes a full day, and you’re welcome to carry on with your day while we work.

The bathroom is protected and ventilation set up.
We remove the old silicone and deep clean the bath.
Chips, rust and pitting are repaired.
We key the bath and apply a bonding primer.
The new finish is sprayed on in several coats and left to cure.

How to prepare

Make sure the area is dry
Let us know about parking or access
Tell us if there are stairs or a lift

Ask for a price

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you are under no obligation.

Send pictures for a quote

Advice

How to look after a re-enamelled bath

Our work in Morda

Morda is about 1 mile south of Oswestry, in Shropshire. From the centre of Morda to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We work in all 433 towns and villages in Shropshire. Our nearest city page is Liverpool, about 39 miles away.

Jobs in SY10 work the same way as everywhere else we cover. Jobs here include addresses on Lower Belle View, Sweeney Drive and Parker Leighton Way. Neighbouring places we cover include Weston (1 mile north-east), Oswestry (1 mile north), Ball (1 mile south-east), Maesbury (2 miles south-east) and Trefonen (2 miles west). We also work in nearby towns such as Coton Hill (15 miles south-east), Frankwell (15 miles south-east), Wem (14 miles east), Oxon (14 miles south-east), Radbrook Green (15 miles south-east) and Copthorne (15 miles south-east).

Local landmarks in Morda

Locally, our jobs take us to homes close to The Marches School, The Marches School and Church of St Oswald. You’ll also find Morda CofE Primary School (less than half a mile south-west) and Sun Inn (1 mile north). Morda’s nearest station is Gobowen station, roughly 3.6 miles north of the centre. Nearby you’ll also find Municipal Borough of Oswestry (1.3 miles north) and Whittington Castle (3.1 miles north-east). Open spaces near Morda include Llanymynech Hill.

Map of Morda © OpenStreetMap contributors

When a repair is not the answer

We will not take on work that won’t last, so these are the limits:

Anything hidden under an old coating, until we remove it
A bath that’s rusted through
Acrylic that moves when you stand in it

If in doubt, send photos and we will say what we think.

What we work on

Acrylic baths
Basins & shower trays
Cast iron baths
Pressed steel baths
Victorian roll-tops

What affects the price in Morda

Resurfacing from £350. We price every job individually. What matters most is:

Whether we combine several jobs
The material
Whether it’s a chip, crack, burn or wear
Any earlier repairs that need removing first

A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Send pictures for a quote

We price nearly every job from photos. This is what to send:

Your postcode, so we can check dates
Any details about the material
A photo taken from further back
Daylight if possible, and no flash reflection

The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.

Morda: your questions answered

Can you quote from photos?

Normally, yes. Clear pictures let us give you a fixed price without visiting.

I rent my home. Can I book you?

We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Do you come to Morda?

Yes. We work across the UK and come to Morda and the rest of Shropshire. Send pictures and we will quote, or call 0345 017 0787.

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote.

Does re-enamelling smell?

Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.

Are there extra charges for Morda?

We don’t add a call-out fee. The fixed price covers the visit and the work.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Why repair rather than replace?

If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.