Shropshire · England
Bath re-enamelling & resurfacing in Weston, Shropshire
Bath re-enamelling in Weston without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- Worn patches where water runs and sits
- Lots of chips and rust spots
About our bath re-enamelling in Weston
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Typical jobs include lots of chips and rust spots and an old resurfacing that’s failing, on Victorian roll-tops, pressed steel baths and acrylic baths.
Big or small, you get the same one-year guarantee in Weston and across Shropshire.
- Where
- Weston (SY10)
- County
- Shropshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
It helps to know what we can’t do:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Shropshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Questions from Weston
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Are there extra charges for Weston?
Travel is included in the price, and we charge the same wherever you are.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Our work in Weston
Weston is about 1 mile south of Oswestry, in Shropshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Weston is one of 433 towns and villages in Shropshire we cover. You can also see our page for Liverpool, about 39 miles away.
Here we cover the SY10 postcode area. Neighbouring places we cover include Morda (1 mile south-west), Oswestry (1 mile north), Ball (1 mile south-east), Middleton (1 mile east) and Maesbury (2 miles south-east). We also work in nearby towns such as Bagley (15 miles south-east), Coton Hill (15 miles south-east), Frankwell (15 miles south-east), Wem (14 miles east), Oxon (14 miles south-east) and Ditherington (15 miles south-east).
Landmarks near Weston
Around Weston, we work in homes near The Marches School, Morda CofE Primary School and The Marches School and the streets around them. You’ll also find Sun Inn (0.7 miles north-west) and Church of Holy Trinity (0.7 miles north). For rail, the closest station is Gobowen station, roughly 3.2 miles north of the centre. Well-known places in the area include Municipal Borough of Oswestry (1 mile north) and Robert Jones and Agnes Hunt Orthopaedic Hospital (2.6 miles north). Open spaces near Weston include Llanymynech Hill.
When to call us in Weston
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Most people contact us when they notice one of these:
- A roll-top that is seen better days
- A bath in a colour that no longer suits
- Wear marks under the taps
- Stains that will not shift
Questions to ask before booking
- What happens if they find more damage
- Whether they match the colour on site
- What protection goes down before work starts
- Whether a trained technician does the job
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. Our prices are the same across the UK, with no extra for Weston. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Free fixed quotes from pictures
- Usually one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
Take a look at our prices page or resurfacing vs replacement cost guide.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
More services for Weston
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- What the surface is made of
- Any earlier repairs that need removing first
- How many areas need work
- Doing more than one item at once
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Where you are, by postcode
- Details of any past repairs
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
For a price in Weston, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Aftercare tips
To keep it looking its best:
- Don’t leave a chip unrepaired
- A dripping tap should be fixed promptly
- Stick to gentle, non-abrasive cleaners
- Do not let dyes or oils sit on the finish
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take most of the day, and you’re welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
