North Yorkshire · England
Bath Re-enamelling in Morton-on-Swale
Damaged bath in Morton-on-Swale? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Stains that won’t shift
Signs you need bath re-enamelling in Morton-on-Swale
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Look out for these signs:
- A coating lifting around the plughole
- Staining under the taps and around the waste
- Wear marks under the taps
- A bath that stays dull however much you clean it
Comparing quotes
- What happens if they find more damage
- How to care for the finish
- How your room will be protected
- A fixed quote, and whether VAT is included
Bath re-enamelling in Morton-on-Swale, done in place
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We work on acrylic baths, pressed steel baths and basins & shower trays, and people most often call us about several chips and rust patches and a period or roll-top bath worth keeping.
Every repair is covered by our one-year guarantee, wherever you are in North Yorkshire.
- Area
- Morton-on-Swale (DL7)
- Area hub
- North Yorkshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What affects the price in Morton-on-Swale
Prices start from £350. Every quote is fixed and free. What we look at:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- How hard the colour is to match
- How easy the damage is to reach
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
Phone photos are fine. Ensure they show:
- Any earlier repairs or coatings
- What it’s made of, if you know
- A photo taken from further back
- Where you are, by postcode
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Questions from Morton-on-Swale
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
Do you come to Morton-on-Swale?
Yes. We work across the UK and come to Morton-on-Swale. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Can you redo someone else’s repair?
Normally, yes. The old repair comes out first, so let us know about it.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Also near Morton-on-Swale
More services for Morton-on-Swale
Aftercare tips
After the repair has cured, a few habits help it last:
- Avoid suction-cup mats
- Do not leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Morton-on-Swale customers choose us
- Free fixed quotes from pictures
- We’ll tell you if it’s not worth repairing
- We leave the room as we found it
- Same prices wherever you are
Take a look at our full price list and resurfacing vs replacement cost guide.
What happens on the day
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the following day.
Preparing for the visit
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
About Morton-on-Swale
Morton-on-Swale is about 3 miles south-west of Northallerton, in North Yorkshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Our technicians cover all 626 towns and villages in North Yorkshire, from the larger towns to small villages. Our jobs stretch from Morton-on-Swale to Leeds (35 miles away).
We work across the DL7 postcode area and the streets around it. That includes homes on Cromwell Drive, Back Lane and Harewood Close. Other places close to Morton-on-Swale include Ainderby Steeple (1 mile north-east), Yafforth (2 miles north-east), Romanby (2 miles east), Northallerton (3 miles north-east) and Brompton (4 miles north-east). Within a short drive, we also cover Ripon (13 miles south), Catterick Garrison (9 miles north-west), Richmond (11 miles north-west), Thirsk (9 miles south-east), Colburn (9 miles north-west) and Sowerby (9 miles south-east).
Near you in Morton-on-Swale
Around Morton-on-Swale, we work in homes near The Old Royal George pub, Church of Saint Helen and Ainderby Steeple Church of England Primary School. The closest station to Morton-on-Swale is Northallerton station, roughly 2.4 miles east of the centre. Nearby you will also find Bedale Castle (4.4 miles south-west) and Friarage Hospital (3.2 miles north-east).
Landlords, agents and businesses in Morton-on-Swale
Landlords, letting agents and housing providers in Morton-on-Swale use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We carry out planned and one-off repairs for housing associations and facilities teams in North Yorkshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
