North Yorkshire · England
Bath Re-enamelling for Yafforth homes
Damaged bath in Yafforth? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Lots of chips and rust spots
Signs you need bath re-enamelling in Yafforth
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Keep an eye out for any of the following:
- Staining under the taps and around the waste
- Lots of chips and rust spots
- Wear marks under the taps
- A coating lifting around the plughole
What to look for in a quote
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- What happens if they find more damage
- Aftercare advice
About our bath re-enamelling in Yafforth
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. If you are dealing with thin, worn enamel in places and a coating lifting around the plughole, we can normally put it right, on cast iron baths, basins & shower trays and pressed steel baths alike.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Area
- Yafforth (DL7)
- County
- North Yorkshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- Unusual colours or finishes
- The material
Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- Where you are, by postcode
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A picture taken from further back
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
Also near Yafforth
Other services in Yafforth
Yafforth questions
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Do you come to Yafforth?
Yes, we do. Repair technicians travel to Yafforth from across the region, with no extra charge for travel.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
How much does bath re-enamelling cost in Yafforth?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Repair or replace: which is better?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
What you get with us
- Rooms protected and left tidy
- We’ll tell you if it’s not worth repairing
- Every repair guaranteed for a year
- Work done at your home or business
Take a look at our prices page and resurfacing vs replacement cost guide.
Our work in Yafforth
Yafforth is about 2 miles west of Northallerton, in North Yorkshire. From the centre of Yafforth to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 626 towns and villages in North Yorkshire, from the larger towns to small villages. You can also see our page for Leeds, about 37 miles away.
Here we cover the DL7 postcode area. Whether you live on Moor Lane and Howe Hill Close or a nearby road, a technician can come to you. Close by, we cover Ainderby Steeple (2 miles south-west), Romanby (2 miles south-east), Northallerton (2 miles east), Morton-on-Swale (2 miles south-west) and Brompton (2 miles north-east). Larger places within reach include Ripon (15 miles south), Catterick Garrison (10 miles west), Richmond (11 miles north-west), Thirsk (9 miles south-east), Colburn (9 miles west) and Stokesley (14 miles north-east).
Around Yafforth
Our clients here include homes close to Allertonshire School and All Saints' Church and the streets around them. The nearest railway station is Northallerton station, roughly 1.6 miles south-east of the centre. Further afield, we also cover the area around Friarage Hospital (1.7 miles east) and Sigston Castle (4.5 miles east).
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
How it works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. The job generally runs to a full day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Read more
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Repair dripping taps early
- Respect the curing time we give you
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Work for landlords and builders
If you manage property in Yafforth, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
We are used to working with agents and managing companies. Send the address, pictures and access details.
About our accreditations · Every repair comes with a one-year guarantee.
