South Ayrshire · Scotland
Bath Re-enamelling for Mossblown homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Mossblown. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A roll-top that’s seen better days
About our bath re-enamelling in Mossblown
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with thin, worn enamel in places and an old resurfacing that’s failing, we can help, whatever the material.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Mossblown (KA6)
- Area hub
- South Ayrshire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Mossblown
For anyone letting property in or around Mossblown, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Repairing versus replacing in Mossblown
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, with the bath back in use the day after. Prices start from £350. Our prices are the same across the UK, with no extra for Mossblown. What changes the price is the job itself: the material, the amount of damage and how many items.
Why choose Surface Doctor in Mossblown
- Dust sheets down, tidy finish
- Colour-matched on site
- Every repair guaranteed for a year
- Free fixed quotes from pictures
Take a look at our prices page and resurfacing vs replacement cost guide.
The process
We work cleanly and quietly. We protect the area first, then the work takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Related advice
About Mossblown
Mossblown is about 3 miles east of Prestwick, in South Ayrshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Mossblown is one of 52 towns and villages in South Ayrshire we cover. Our jobs stretch from Mossblown to Glasgow (about 27 miles away).
Jobs in KA6 work the same way as everywhere else we cover. You will find streets such as Station Road, Southside Avenue and Martin Avenue, and we cover them all. Nearby, we also work in Annbank (1 mile south), St Quivox (2 miles west), Sundrum (2 miles south), Joppa (3 miles south) and Coylton (3 miles south). Further out, we also cover Ayr (5 miles south-west), Troon (6 miles north-west), Prestwick (3 miles west), Heathfield (3 miles west), Belmont (5 miles south-west) and Forehill (4 miles south-west).
Local landmarks in Mossblown
In Mossblown, that means homes near Drumley House School and Mossblown and the streets around them. Mossblown’s nearest station is Prestwick Town station, about 3.5 miles west of the centre. Further afield, we also cover the area around Bachelors' Club (2.2 miles north-east) and Gadgirth Old Ha' (1.8 miles south). Not far away are Lochend Loch.
Honest limits
A repair is not always the answer, and we’d rather say so up front. Repairs won’t solve:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- Steel that has corroded right through
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Signs you need bath re-enamelling in Mossblown
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
The most common problems we are called about are:
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
- A coloured bath you want in white
Comparing quotes
- What prep work is covered
- How the colour is matched
- How long the guarantee is and what it covers
- How long it needs to cure
Aftercare tips
To keep it looking its best for years:
- Fix dripping taps quickly
- Don’t let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
- Don’t leave a chip unrepaired
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- How many items we do on one visit
- What the surface is made of
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- A photo taken from further back
- What it’s made of, if you know
- Where you are, by postcode
- Daylight if possible, and no flash reflection
If you’re in Mossblown and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
What else we do in Mossblown
Mossblown questions
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
How much does bath re-enamelling cost in Mossblown?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up and a picture of the entire item with your KA6 postcode.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first, so let us know about it.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
About our accreditations · Every repair comes with a one-year guarantee.
