South Ayrshire · Scotland
Bath re-enamelling & resurfacing in Sundrum, South Ayrshire
Fixed-price bath re-enamelling in Sundrum and the surrounding area, usually in one visit.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
Common questions in Sundrum
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your KA6 postcode.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
About our bath re-enamelling in Sundrum
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Typical jobs include lots of chips and rust spots and a bath that stays dull however much you clean it, on Victorian roll-tops, cast iron baths and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Sundrum (KA6)
- County
- South Ayrshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Sundrum
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What else we do in Sundrum
Honest limits
In fairness, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Keeping it looking good
How the surface is treated afterwards matters:
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Don’t let dyes or oils sit on the finish
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Where we work around Sundrum
Sundrum is about 4 miles east of Ayr, in South Ayrshire. Whether you’re in the middle of Sundrum or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Sundrum is one of 52 towns and villages in South Ayrshire we cover. We work right across the region, from Sundrum to Glasgow (about 29 miles away).
Postcode districts we cover here: KA6. Other places close to Sundrum include Joppa (1 mile south), Coylton (1 mile south), Annbank (1 mile north), Mossblown (2 miles north) and St Quivox (3 miles north-west). Within a short drive, we also cover Ayr (4 miles west), Troon (8 miles north-west), Prestwick (4 miles north-west), Heathfield (4 miles west), Belmont (4 miles west) and Forehill (4 miles west).
What’s near Sundrum
Our customers here include homes close to Coylton Parish Church and the streets around them. For rail, the closest station is Ayr station, about 4.4 miles west of the centre. Other landmarks nearby include Ailsa Hospital (3.5 miles south-west) and Bachelors' Club (4 miles north). For a walk, there’s Lochend Loch.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why us?
- We will tell you if it’s not worth repairing
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
Read our prices page and guide to resurfacing and replacement costs.
How it works
You do not need to empty the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. It normally takes the best part of a day, and you’re welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
- Make sure the area is dry
Getting a price
If you are in Sundrum and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Unusual colours or finishes
- The type of damage
- How many items we do on one visit
- Any earlier repairs that need removing first
Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your photos
When you take your photos, a few simple things make all the difference:
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
