Highland · Scotland
Bath re-enamelling & resurfacing in Beauly, Highland
Problem with your bath in Beauly? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
What we cannot put right
A repair isn’t right for every job, including:
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Beauly
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Bath re-enamelling in Beauly without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. If you are dealing with chips and rust in more than one place and a bath that stays dull however much you clean it, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Beauly (IV4)
- County
- Highland
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Beauly
Other services in Beauly
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Aftercare tips
Once the work has cured, treat it gently:
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- Get any chip repaired quickly
- Do not use the bath until it has fully cured
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
- Make sure the area is dry
Ask for a price
For a price in Beauly, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Beauly questions
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and you will get one combined price.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you work in Beauly?
We do. Technicians travel to Beauly from across the region, with no extra charge for travel.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Beauly and nearby
Beauly is about 9 miles west of Inverness, in Highland. From the centre of Beauly to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 253 places in Highland, from the larger towns to small villages.
Jobs in IV4 work the same way as everywhere else we cover. Whether you live on High Street, The Square and Station Road or a nearby road, a technician can come to you. Other places close to Beauly include Windhill (1 mile north), Kirkhill (2 miles east), Muir of Ord (3 miles north), Kiltarlity (3 miles south) and Marybank (5 miles north-west). Larger places within reach include Inverness (9 miles east), Cradlehall (12 miles east), Merkinch (8 miles east), Dingwall (8 miles north), Hilton (9 miles east) and Crown (9 miles east). If you’re somewhere remote, ring us first and we will plan the trip.
Around Beauly
We visit homes around Beauly and the streets around them. The nearest railway station is Beauly station, about 0.5 miles south-west of the centre. A little further out are Lovat Castle (0.8 miles east). Open spaces near Beauly include Loch nam Bonnach.
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Beauly customers choose us
- Work done at your home or business
- Everything repaired in place
- Colour mixed on the day to match
- One price list for the whole UK
See our full price list and resurfacing vs replacement cost guide.
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Signs you need bath re-enamelling in Beauly
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Look out for these signs:
- Wear marks under the taps
- A roll-top that’s seen better days
- A dull, rough surface that will not come clean
- A peeling or bubbling previous coating
Before booking anyone
- What happens if the damage is worse than the pictures show
- How to care for the finish
- When it can be used again
- How your room will be protected
About our accreditations · Every repair comes with a one-year guarantee.
