Lincolnshire · England
Bath Re-enamelling in Mumby
Bath re-enamelling across Mumby and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
About our bath re-enamelling in Mumby
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s thin, worn enamel in places and staining under the taps and around the waste, we can help, whatever the material.
Whatever the size of the job, you get the same one-year guarantee in Mumby and across Lincolnshire.
- Location
- Mumby (LN13)
- Area hub
- Lincolnshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Mumby. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- How easy the damage is to reach
- How much damage there is
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with nothing added on the day.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- A photo taken from further back
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- The postcode, so we can plan the visit
Upload pictures of the damage and one of the entire item, and tell us you are in Mumby, and we will reply with a fixed price.
How it works
Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes most of the day. We leave the room clean and you’ll know when it can be used.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
Get a quote
Most customers in Mumby get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
What we can’t put right
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- Problems we can’t see until an old finish comes off
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Mumby
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
How to look after the repair
It’s all simple stuff:
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
- Store bottles off the bath
- Fix dripping taps quickly
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Should you replace it?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Mumby customers choose us
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- Colour-matched on site
- Rooms protected and left tidy
Read our prices page or resurfacing vs replacement cost guide.
Mumby and nearby
Mumby is about 7 miles north of Skegness, in Lincolnshire. Customers in Mumby get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in all 732 towns and villages in Lincolnshire, from the larger towns to small villages.
We cover every part of the LN13 postcode area and the streets around it. Local streets include Station Road, Parklands and Hogsthorpe Road, all of which we cover. We also cover the places around Mumby: Cumberworth (1 mile south-west), Helsey (1 mile south), Huttoft (1 mile north), Listoft (2 miles south) and Bonthorpe (2 miles west). Within a short drive, we also cover Louth (14 miles north-west), Skegness (7 miles south), Mablethorpe (7 miles north), Sutton on Sea (4 miles north), Spilsby (9 miles south-west) and Alford (4 miles west).
Near you in Mumby
Our clients here include homes close to Church of St Thomas of Canterbury and the streets around them. Nearby you will also find Mawthorpe Bygones Museum (3.5 miles west) and Alford and District War Memorial Cottage Hospital (4.3 miles west). Green spaces nearby include Miles Cross Hill.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Your questions about bath re-enamelling in Mumby
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Do you cover Mumby?
Yes. We cover the entire UK and come to Mumby and the rest of Lincolnshire. Send photos and we will quote, or call 0345 017 0787.
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
How do I get a price for bath re-enamelling in Mumby?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Common problems we fix in Mumby
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a picture:
- Chips and rust in more than one place
- Staining under the taps and around the waste
- A coloured bath you want in white
- A roll-top that’s seen better days
Comparing quotes
- Aftercare advice
- What happens if they find more damage
- Whether they match the colour on site
- How your room will be protected
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Nearby places to Mumby
Also in Mumby
About our accreditations · Every repair comes with a one-year guarantee.
