North Somerset · England
Bath re-enamelling & resurfacing in Stone-edge Batch, North Somerset
Fixed-price bath re-enamelling in Stone-edge Batch and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- Several chips and rust patches
Bath re-enamelling in Stone-edge Batch, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair cast iron baths, Victorian roll-tops and acrylic baths, and the jobs we see most are thin, worn enamel in places and a bath that stays dull however much you clean it.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Where
- Stone-edge Batch (BS21)
- Region
- North Somerset
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Stone-edge Batch
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted:
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
- Stains that will not shift
What to look for in a quote
- What aftercare is recommended
- A fixed price, and whether VAT is included
- When it can be used again
- What prep work is covered
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Do not leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repair or replace in Stone-edge Batch?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Why book with us
- A year’s guarantee on all work
- Dust sheets down, tidy finish
- Same prices wherever you are
- Work done at your home or business
See our full price list or resurfacing vs replacement cost guide.
Covering Stone-edge Batch
Stone-edge Batch is about 1 mile north of Nailsea, in North Somerset. Whether you’re in the middle of Stone-edge Batch or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 86 places across North Somerset, from the larger towns to small villages. Our jobs stretch from Stone-edge Batch to Birmingham (about 80 miles away).
Every address in BS21 is within our area, from the main roads to the quietest streets. Local streets include Summerhouse, The Ripple and Tickenham Hill. Nearby, we also work in West Hill (1 mile east), Tickenham (1 mile west), Nailsea (1 mile south), Clapton in Gordano (1 mile north) and Wraxall (2 miles east). Further out, we also cover Weston-super-Mare (10 miles south-west), Portishead (3 miles north), Clevedon (4 miles west), Milton (10 miles south-west), Yatton (5 miles south-west) and Worle (9 miles south-west).
Around Stone-edge Batch
Our customers here include homes close to Christ Church, Nailsea School and The Star Inn and the streets around them. Stone-edge Batch’s nearest station is Nailsea & Backwell station, roughly 1.8 miles south of the centre. Nearby you will also find North Somerset Community Hospital (3.6 miles west) and Oakham Treasures (2.6 miles north-east). Open spaces near Stone-edge Batch include Clapton Moor and Tickenham Hill.
Places near Stone-edge Batch
Other services in Stone-edge Batch
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the next day.
How to prepare
- Let the surface dry out before the visit
- Point us to the nearest place to park
- Make sure the room can be ventilated
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.
Advice
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Stone-edge Batch: your questions answered
Do you work in Stone-edge Batch?
Yes. We work across the UK and come to Stone-edge Batch and the rest of North Somerset. Send photos and we will quote, or call 0345 017 0787.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Stone-edge Batch.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your pictures and we’ll quote them together.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
What a repair can’t fix
We’d rather lose a job than do one that will not last, so these are the limits:
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
