Cornwall · England
Bath Re-enamelling for Nansledan homes
We travel to Nansledan for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
Bath re-enamelling in Nansledan, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Common call-outs are for wear marks under the taps and a peeling or bubbling previous coating, across Victorian roll-tops, acrylic baths and pressed steel baths.
Big or small, you get the same one-year guarantee in Nansledan and across Cornwall.
- Area
- Nansledan (TR8, TR7)
- Region
- Cornwall
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
What affects the price in Nansledan
Resurfacing from £350. Every quote is fixed and free. What we look at:
- How hard the colour is to match
- The type of damage
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Getting a price from photos
Two or three clear photos are normally enough. It helps if you send:
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Something in shot to show the size
- The material, if you know it
To get a price, send a couple of pictures using our quote form or ring us. We will say immediately if a repair is the right fix.
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to most of the day, including clearing up.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
How to get a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Advice
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Fix dripping taps quickly
- Keep suction mats out of the bath
- Do not use the bath until it has fully cured
- Wash away dyes and oils after use
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Common questions in Nansledan
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Nansledan.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Nansledan and nearby
Nansledan is about 1 mile east of Newquay, in Cornwall. Wherever you are in the TR8 postcode area, we carry out the work at your property. We work in all 644 towns and villages across Cornwall.
We cover every part of TR8 and TR7. From Leader Road, Church Lane and Rialton Road or a nearby road, we can come to you. Nansledan is on the A3059, so it’s easy for us to reach. We also travel to St Columb Minor (1 mile north-west), Trencreek (1 mile south-west), Quintrell Downs (1 mile south-east), Porth (1 mile north-west) and Lane (1 mile south-west). Further out, we also cover Truro (10 miles south), St Austell (13 miles south-east), Bodmin (15 miles east), Redruth (15 miles south-west), Sandy Bottom (13 miles east) and Bethel (13 miles east).
Landmarks near Nansledan
Typical jobs here are in homes near Treviglas Academy, Church of St Columb Minor (Methodist) and St Columb Minor Academy, among other places. Nansledan’s nearest station is Quintrell Downs station, about 0.8 miles south-east. Nearby you will also find Cornwall Aviation Heritage Centre (1.2 miles north-east) and Newquay Community Hospital (1.5 miles west).
What we can’t put right
In fairness, some problems need a different fix:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- A bath split right through the body
If in doubt, send photos and we will say what we think.
Materials we work on in Nansledan
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Towns and villages near Nansledan
Other services in Nansledan
What we are called out for in Nansledan
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
Common reasons people in Nansledan contact us include:
- An outdated colour you’d like to change
- An old resurfacing that’s failing
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
Comparing quotes
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
- What the guarantee covers, and for how long
- How to care for the finish
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
