Cornwall · England
Bath Re-enamelling for Trencreek homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Trencreek. Free, fixed quotes from your photos.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Wear marks under the taps
FAQs for Trencreek
How long will the bath be out of use?
One day for most baths, ready the day after. We will confirm timings when we quote.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you cover Trencreek?
Yes, we do. We send a technician to Trencreek for every job, and the price is the same as everywhere else.
Bath re-enamelling at your home in Trencreek
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. If you’re dealing with stains that won’t shift and a period or roll-top bath worth keeping, we can usually put it right, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Trencreek (TR7, TR8)
- Region
- Cornwall
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
How to look after the repair
After the repair has cured, a few habits help it last:
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Don’t let dyes or oils sit on the finish
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Common problems we fix in Trencreek
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
- Chips and rust in more than one place
- An outdated colour you’d like to change
What your quote should include
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- What happens if they find more damage
- What aftercare is recommended
Towns and villages near Trencreek
What else we do in Trencreek
Covering Trencreek
Trencreek is about 1 mile south-east of Newquay, in Cornwall. Anywhere in TR7, a technician comes to you. Trencreek is one of 644 towns and villages in Cornwall where we work.
Postcode districts we cover here: TR7 and TR8. From Dale Road, Polwhele Road and Treloggan Road or a nearby road, we can come to you. Neighbouring places we cover include Lane (1 mile south), Newquay (1 mile north-west), St Columb Minor (1 mile north-east), Treninnick (1 mile west) and Nansledan (1 mile north-east). Further out, we also cover Truro (10 miles south), St Austell (13 miles east), Bodmin (15 miles east), Redruth (14 miles south-west), Sandy Bottom (13 miles east) and Bethel (14 miles east).
What’s near Trencreek
Our customers here include homes close to The Kings Head pub, Newquay Tretherras and Church of St Columb Minor (Methodist), among other places. The closest station to Trencreek is Newquay station, about 0.9 miles north-west of the centre. Well-known places in the area include Newquay Community Hospital (0.8 miles west) and Trenance Cottages Museum (0.8 miles west).
For landlords and businesses
If you manage property in Trencreek, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes most of the day, and we will tell you if anything changes.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know about parking or access
- Let the surface dry out before the visit
- Have a window or extractor fan available
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Advice
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- The type of damage
- How hard the colour is to match
- How many items we do on one visit
- The size and number of damaged areas
We charge the same wherever you are, with no extra for Trencreek. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- Daylight if possible, and no flash reflection
- Any details about the material
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Repairing versus replacing in Trencreek
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why Trencreek clients choose us
- Colour mixed on the day to match
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
Read our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
