Leicestershire · England
Bath re-enamelling & resurfacing in Narborough, Leicestershire
We travel to Narborough for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Where we work around Narborough
Narborough is about 4 miles west of Wigston, in Leicestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Narborough is one of 287 towns and villages in Leicestershire where we work. We work right across the region, from Narborough to Birmingham (about 29 miles away).
All of LE19 is covered, from the main roads to the quietest streets. Streets in the area include Station Road, Primrose Close and Copt Oak Road. Other places close to Narborough include Littlethorpe (1 mile south-east), Enderby (1 mile north), Huncote (1 mile west), Croft (2 miles south-west) and Thurlaston (2 miles north-west). Further out, we also cover Loughborough (13 miles north), Hinckley (7 miles west), Wigston (4 miles east), Coalville (12 miles north-west), Shepshed (14 miles north) and Syston (10 miles north-east).
Around Narborough
Locally, our jobs take us to homes close to Red Hill Field Primary School, Brockington College and Glen Parva Nature Reserve. Nearby too are Congregational Church (less than half a mile south-east) and Narborough Arms (0.5 miles south-east). For rail, the closest station is Narborough station, about 0.5 miles south-east of the centre. Other landmarks nearby include Fosse Shopping Park (2.2 miles north-east) and Fielding Johnson Building (4.9 miles north-east). Open spaces near Narborough include Croft Hill and Stoney Cove.
Bath re-enamelling in Narborough, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Typical jobs include staining under the taps and around the waste and an original cast iron bath that needs restoring, on Victorian roll-tops, acrylic baths and basins & shower trays.
Every repair comes with our one-year guarantee, wherever you are in Leicestershire.
- Location
- Narborough (LE19)
- Area hub
- Leicestershire
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Narborough
More services for Narborough
Questions from Narborough
How much does bath re-enamelling cost in Narborough?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
What happens on the day
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a full day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Keep a parking space free if you can
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
How to get a price
If you’re in Narborough and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Narborough. What changes the price is:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- How many areas need work
- What kind of damage it is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- What it’s made of, if you know
- Whether it’s been repaired or coated before
Most clients in Narborough get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Rinse off hair dye, oils and bath bombs straight away
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Use washing-up liquid and a soft cloth
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Honest limits
It helps to know what we cannot do too:
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
Send us photos and we will tell you honestly.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
When to call us in Narborough
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Clients normally contact us about:
- A peeling or bubbling previous coating
- Thin, worn enamel in places
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
What to look for in a quote
- What prep work is covered
- Whether the price covers travel
- Whether the colour is mixed to match
- How long it needs to cure
About our accreditations · Every repair comes with a one-year guarantee.
