Hampshire · England

Bath Re-enamelling for Nately Scures homes

Problem with your bath in Nately Scures? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Nately Scures?

Signs you need bath re-enamelling in Nately Scures

A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.

Get in touch if you’ve noticed:

  • Several chips and rust patches
  • A peeling or bubbling previous coating
  • Thin, worn enamel in places
  • A bath that stays dull however much you clean it

Comparing quotes

  • Whether the colour is mixed to match
  • Who will actually do the work
  • How soon you can use it again
  • If travel is included in the price

10 questions to ask before you book

About our bath re-enamelling in Nately Scures

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on cast iron baths, basins & shower trays and Victorian roll-tops, and common reasons people get in touch are a coating lifting around the plughole and worn patches where water runs and sits.

Whatever the size of the job, it’s backed by a one-year guarantee.

Location
Nately Scures (RG27)
Region
Hampshire
Cover
One year on every repair
Quote
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: an old basin refinished to bright white

What affects the price in Nately Scures

Resurfacing from £350. Prices are worked out job by job. The main factors are:

  • Whether it’s a chip, crack, burn or wear
  • Access to the area
  • How many areas need work
  • Whether old repairs or coatings need taking off

Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Quotes from your pictures

We price nearly every job from pictures. This is what to send:

  • A coin or ruler next to the damage for scale
  • Natural light rather than flash
  • One picture of the entire bath
  • Details of any past repairs

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.

What we do, step by step

We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a full day, and the room is left clean and tidy.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the day after, the bath is ready.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Let the surface dry out before the visit
  • Let us know about parking or access

How to get a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Get a fixed quote

Related advice

Work for landlords and builders

We’re used to working with agents and managing companies. Send the address, photos and access details.

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Covering Nately Scures

Nately Scures is about 5 miles east of Basingstoke, in Hampshire. We visit clients in Nately Scures, so there is no workshop to go to. We cover 683 places across Hampshire, from the larger towns to small villages. We work right across the region, from Nately Scures to London (about 42 miles away).

Our visits in RG27 work the same way as everywhere else we cover. Neighbouring places we cover include Newnham (1 mile north), Up Nately (1 mile south), Hook Common (1 mile north-east), Warnborough Green (1 mile east) and Greywell (1 mile south-east). Further out, we also cover Basingstoke (5 miles west), Farnborough (10 miles east), Fleet (6 miles east), Aldershot (10 miles east), Alton (9 miles south) and Yateley (8 miles north-east).

Around Nately Scures

Typical jobs here are in homes near Robert May's School and Church of St. Nicholas. The nearest railway station is Hook station, about 1.2 miles east. Further afield, we also cover the area around Basing House (2.8 miles west) and Basingstoke and North Hampshire Hospital (5.3 miles west). The countryside around Nately Scures includes The Mill Field and Dogmersfield Lake.

Map of Nately Scures © OpenStreetMap contributors

What a repair cannot fix

Before you book, it’s worth knowing the limits:

  • Leaks from fittings rather than the bath
  • Problems we can’t see until an old finish comes off
  • Steel that has corroded right through

Not sure? Send pictures and we will give you a straight answer.

Materials we repair

  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

Different materials, different repairs

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

Your questions about bath re-enamelling in Nately Scures

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

Can you price it without visiting?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

What areas do you cover?

The entire UK, including all of Hampshire. Just include your postcode and we’ll offer you dates.

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum.

How long does re-enamelling take?

One day for most baths, ready the following day. We will confirm timings when we quote.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Can you repair several things at once?

Of course, and it usually saves money. Just add the extra items to your photos and you’ll get one combined price.

How to care for the repair

Simple care helps the repair last. We recommend:

  • Repair dripping taps early
  • Have chips seen to early
  • Keep suction mats out of the bath
  • Leave the bath for the full curing time before using it

A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.