Nottinghamshire · England

Bath Re-enamelling for Nether Langwith homes

We travel to Nether Langwith for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • Brown or grey marks that don’t clean off
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Nether Langwith

Keeping it looking good

It’s all simple stuff, just a few sensible habits:

  • Keep suction mats out of the bath
  • Don’t leave a chip unrepaired
  • Keep toiletries on a shelf rather than in the bath
  • Repair dripping taps early

The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

Bath re-enamelling at your home in Nether Langwith

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a bath in a colour that no longer suits and lots of chips and rust spots, we can help, whatever the material.

Big or small, you get the same one-year guarantee.

Area
Nether Langwith (NG20)
Region
Nottinghamshire
Warranty
12 months on all our work
Quote
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What we cannot put right

A repair is not right for every job, for example:

  • Acrylic that moves when you stand in it
  • A metal bath with a through crack
  • Leaks from fittings rather than the bath

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Cast iron baths
  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths

Repairing versus replacing in Nether Langwith

Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.

Why us?

  • Colour mixed on the day to match
  • A fixed quote before booking
  • Straight answers about what a repair can do
  • Same prices wherever you are

See our prices page and guide to resurfacing and replacement costs.

Landlord and trade work in Nether Langwith

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

We work for landlords, letting agents and housing providers in Nether Langwith as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

What we do, step by step

Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the day after.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Keep children and pets away from the room on the day
  • Tell us if there are stairs or a lift

Get a quote

Email us pictures of the damage and one of the entire item, and tell us you’re in Nether Langwith, and we will come back with a fixed quote.

Get a fixed quote

Related advice

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

Materials and what they mean for the repair

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

FAQs for Nether Langwith

What happens if you find more damage?

The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.

Will the new finish last?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Can you re-enamel a roll-top bath?

Yes. Inside and out.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How long is the bath unusable?

One day for most baths, ready the following day. We’ll confirm timings when we quote.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

What bath re-enamelling costs

Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:

  • What kind of damage it is
  • The colour and finish to match
  • Doing more than one item at once
  • Access to the area

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

How to get a fixed quote

Phone pictures are fine. Just make sure we can see:

  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection
  • A wider photo showing the entire bath
  • A close-up of the damage, in focus

The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.

Nether Langwith and the surrounding area

Nether Langwith is about 1 mile north of Shirebrook, in Nottinghamshire. Whether you’re in the middle of Nether Langwith or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 329 towns and villages in Nottinghamshire. Our jobs stretch from Nether Langwith to Leeds (43 miles away).

Postcode districts we cover here: NG20. From Dale Close, Devonshire Drive and Cavendish Street or a nearby road, we can come to you. Close by, we cover Langwith (1 mile north), Upper Langwith (1 mile west), Langwith Junction (1 mile south), Whaley Thorns (1 mile north) and Shirebrook (1 mile south). Within a short drive, we also cover Mansfield (5 miles south), Worksop (8 miles north-east), Sutton in Ashfield (7 miles south), Hucknall (13 miles south), Retford (13 miles north-east) and Mansfield Woodhouse (4 miles south).

Landmarks near Nether Langwith

Around Nether Langwith, we work in homes near Shirebrook Academy, Church of the Holy Cross and The Jug And Glass Inn, among other places. The nearest railway station is Langwith - Whaley Thorns station, about 0.9 miles north. Other landmarks nearby include Creswell Crags Museum and Heritage Centre (3.9 miles north) and Bolsover Hospital (2.9 miles west).

  • Local facilities include Norton and Cuckney (2.8 miles north-east)
Map of Nether Langwith © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.