Cumbria · England
Bath re-enamelling & resurfacing in Netherby, Cumbria
Full bath re-enamelling and resurfacing for homes and businesses in Netherby and across Cumbria. Send photos for a free, fixed quote.
- Resurfacing from £350
- A roll-top that’s seen better days
- A bath that stays dull however much you clean it
What a repair can’t fix
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
About our bath re-enamelling in Netherby
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Our technicians work on Victorian roll-tops, cast iron baths and acrylic baths, and people most frequently call us about a dull, rough surface that won’t come clean and an old resurfacing that’s failing.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Netherby (CA6)
- Area hub
- Cumbria
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we do, step by step
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take most of the day, and you can get on with other things while we’re there.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the day after.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
- Keep a parking space free if you can
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
Related advice
Nearby places to Netherby
More services for Netherby
Repairing versus replacing in Netherby
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
What you get with us
- No extra charge for your area
- We come to you, anywhere in the UK
- Nothing taken out or refitted
- Most jobs done in one visit
Read our full price list or resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Netherby?
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Customers normally contact us about:
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
Before you book anyone
- The length of the guarantee and what it covers
- Whether the price covers travel
- Whether the colour is mixed to match
- What happens if they find more damage
What bath re-enamelling costs
Prices start from £350. There is no charge for travel to Netherby. The price comes down to:
- Where the damage is and how we get to it
- How many items we do on one visit
- How hard the colour is to match
- The material
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- One picture of the whole bath
- Something in shot to show the size
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
Email us a picture of the damage and a wider shot of the whole item, with your CA6 postcode, and we will reply with a fixed price.
Netherby and nearby
Netherby is about 10 miles north of Carlisle, in Cumbria. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Our repair technicians cover 438 places across Cumbria. You can also see our page for Newcastle upon Tyne, about 52 miles away.
Every address in CA6 is covered. Close by, we cover Longtown (2 miles south-west), Canonbie (3 miles north), Blackbank (4 miles south-west), Westlinton (5 miles south) and Smithfield (5 miles south-east). We also work in nearby towns such as Carlisle (10 miles south), Currock (11 miles south), Raffles (10 miles south), Botcherby (11 miles south), Morton (11 miles south) and Belle Vue (10 miles south).
Near you in Netherby
Locally, our jobs take us to homes close to Church of St Andrew and the streets around them.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Aftercare tips
Once the work has cured, treat it gently:
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Questions from Netherby
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
How do I get a price for bath re-enamelling in Netherby?
Resurfacing from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Which areas do you work in?
We cover the whole UK, including Netherby and the rest of Cumbria. Just include your postcode and we will confirm dates.
About our accreditations · Every repair comes with a one-year guarantee.
