Somerset · England

Bath re-enamelling & resurfacing in Nethercott, Somerset

Bath re-enamelling in and around Nethercott: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Nethercott homes

Bath re-enamelling in Nethercott without replacing anything

Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with enamel that’s lost its shine and feels rough and a roll-top that’s seen better days, we can usually put it right.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.

Location
Nethercott (TA4)
County
Somerset
Warranty
12 months on all our work
Quote
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

How the visit works

Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes most of the day, and we leave the room as we found it.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Let the surface dry out before the visit
  • Open a window if you can

How to get a price

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a fixed quote

Read more

What we cannot put right

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Holes rusted through the metal
  • Damage hidden under a previous coating, until it’s stripped back
  • A bath split right through the body

If in doubt, send photos and we’ll say what we think before booking.

What we work on

  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays

What bath re-enamelling costs

Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:

  • Unusual colours or finishes
  • The material and finish
  • Doing more than one item at once
  • How easy the damage is to reach

The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.

Getting a price from pictures

When you take your pictures, these tips help us give you a firm price:

  • Your postcode, so we can check dates
  • Any earlier repairs or coatings
  • One picture of the whole bath
  • What it’s made of, if you know

There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

Common questions in Nethercott

Can you resurface a pink bath in white?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

Will the price change on the day?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Can you re-enamel a roll-top bath?

Yes. Inside and out.

Will there be fumes?

Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.

How long will the bath be out of use?

Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

Can you repair several things at once?

Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.

Is the work guaranteed?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Repair or replace: which is better?

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why choose Surface Doctor in Nethercott

  • No extra charge for your area
  • Dust sheets down, tidy finish
  • Everything repaired in place
  • Repair technicians who travel to you, UK-wide

See our full price list and guide to resurfacing and replacement costs.

Looking after it afterwards

Once the work has cured, treat it gently:

  • Never use suction bath mats
  • Use washing-up liquid and a soft cloth
  • Get any chip repaired quickly
  • Store bottles off the bath

Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

Work for landlords and builders

If you manage property in Nethercott, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

When to call us in Nethercott

Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, generally first under the taps and around the waste.

Send us a photo if you notice any of these:

  • A bath in a colour that no longer suits
  • Stains that won’t shift
  • Chips and rust in more than one place
  • Enamel that is lost its shine and feels rough

What your quote should include

  • Aftercare advice
  • When it can be used again
  • Whether the colour is mixed to match
  • Whether there are any call-out or travel charges

Our hiring checklist

Nethercott and nearby

Nethercott is about 7 miles north-west of Taunton, in Somerset. Jobs in Nethercott are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our repair technicians cover 640 places across Somerset.

We work across the TA4 postcode area. We also travel to Combe Florey (1 mile south-east), Rich's Holford (1 mile north), Lydeard St Lawrence (1 mile west), Westowe (1 mile west) and Ash Priors (2 miles south). Larger places within reach include Taunton (7 miles south-east), Bridgwater (10 miles east), Minehead (14 miles north-west), Burnham-on-Sea (14 miles north-east), Wellington (7 miles south) and Sydenham (11 miles east).

Near you in Nethercott

We visit homes around Church of St Peter & St Paul, among other places. A little further out are Merrifield Children's Unit (3.4 miles south) and Blazes (1.3 miles south-east). Open spaces near Nethercott include Wills Neck.

Map of Nethercott © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.