Sunderland · England
Bath Re-enamelling in New Lambton
Bath re-enamelling in and around New Lambton: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A roll-top that is seen better days
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Keep suction mats out of the bath
- Don’t leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
- Do not leave a chip unrepaired
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Bath re-enamelling at your home in New Lambton
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for thin, worn enamel in places and a period or roll-top bath worth keeping, in Victorian roll-tops, basins & shower trays and cast iron baths.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- New Lambton (DH4, DH3)
- Region
- Sunderland
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to New Lambton
Also in New Lambton
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When a repair is not the answer
We won’t take on work that won’t last, so these are the limits:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in New Lambton
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to New Lambton. The price comes down to:
- How easy the damage is to reach
- The colour and finish to match
- Any earlier repairs that need removing first
- The type of damage
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can usually get a fixed price without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- Any details about the material
- A clear, close picture of the problem area
- Details of any past repairs
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
New Lambton questions
How long will the bath be out of use?
Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
The process
Your technician turns up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Our work in New Lambton
New Lambton is about 2 miles west of Houghton-le-Spring, in Sunderland. Jobs in New Lambton are booked in like any other job: a fixed quote from pictures, then a visit to do the work. New Lambton is one of 75 towns and villages in Sunderland we cover. Our nearest city page is Newcastle upon Tyne, about 11 miles away.
All of DH4 and DH3 is covered. Jobs here include addresses on Lumley New Road, Carnation Avenue and Ravensworth Avenue. New Lambton is on the A1052, which makes it straightforward to reach. Neighbouring places we cover include Woodstone Village (1 mile south-west), Bournmoor (1 mile north-west), Lumley Thicks (1 mile west), Castle Dene (1 mile west) and Great Lumley (2 miles south-west). We also work in nearby towns such as Sunderland (5 miles north-east), Washington (3 miles north), Sunniside (7 miles north-east), Fulwell (7 miles north-east), Hendon (7 miles north-east) and Ford (5 miles north-east).
What’s near New Lambton
We visit homes around Church of St Barnabas, Woodlea Primary School and Kepier School, among other places. For rail, the closest station is Chester-Le-Street station, about 2.7 miles west of the centre. A little further out are Chester-le-Street (2.6 miles west) and Chester Le Street Hospital (2.6 miles west). Open spaces near New Lambton include Warden Law and WWT Washington.
Signs you need bath re-enamelling in New Lambton
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Look out for these signs:
- Thin, worn enamel in places
- Chips and rust in more than one place
- A roll-top that is seen better days
- Brown or grey marks that don’t clean off
What to look for in a quote
- What prep work is covered
- How soon you can use it again
- How the colour is matched
- What happens if they find more damage
Repair or replace in New Lambton?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- One price list for the whole UK
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
Read our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
