Staffordshire · England
Bath re-enamelling & resurfacing in New Wood, Staffordshire
Full bath re-enamelling and resurfacing in New Wood, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Enamel that is lost its shine and feels rough
About our bath re-enamelling in New Wood
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. We regularly repair acrylic baths, Victorian roll-tops and cast iron baths, and the jobs we see most are chips and rust in more than one place and a coloured bath you want in white.
Big or small, you get the same one-year guarantee.
- Location
- New Wood (DY7, DY8)
- County
- Staffordshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Landlords, agents and businesses in New Wood
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- What kind of damage it is
- How easy the damage is to reach
- How hard the colour is to match
- The material and finish
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Send photos for a quote
Good photos mean an accurate price. Here’s what helps:
- A clear, close picture of the problem area
- One picture of the whole bath
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
If you are in New Wood and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Places near New Wood
Also in New Wood
The process
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. Allow most of the day.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Let us know about parking or access
Get a quote
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What we’re called out for in New Wood
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
Get in touch if you’ve noticed:
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- Wear marks under the taps
- A bath in a colour that no longer suits
What to look for in a quote
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
- How long it needs to cure
- Who will actually do the work
Where we work around New Wood
New Wood is about 2 miles north-west of Stourbridge, in Staffordshire. Customers in New Wood get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Our technicians cover 512 places across Staffordshire. Our jobs stretch from New Wood to Birmingham (about 12 miles away).
We work across the DY7 and DY8 postcode area and the streets around it. Jobs here include addresses on Hyperion Road, Chantry Road and Prestwood Drive and the roads around them. Other places close to New Wood include Wollaston (1 mile south-east), Amblecote (1 mile south-east), Lawns Wood (1 mile north-west), Norton (1 mile south-east) and Stourton (1 mile west). We also work in nearby towns such as Wombourne (5 miles north), Great Wyrley (15 miles north-east), Codsall (11 miles north), Littlewood (15 miles north-east), Cheslyn Hay (15 miles north-east) and Kinver (3 miles south-west).
Around New Wood
Our clients here include homes close to St James's CofE Primary School, Ridgewood High School and Church of St James, among other places. Also close by are Mary Stevens Park (1.4 miles south-east) and Britannia Sports Bar (0.5 miles east). The closest station to New Wood is Stourbridge Town station, roughly 1.5 miles south-east of the centre. Nearby you’ll also find Corbett Hospital (1.1 miles east) and Stourton Castle (1.6 miles west). Open spaces near New Wood include Kinver Edge and Stourton Pit.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep suction mats out of the bath
- Store bottles off the bath
- Rinse off hair dye, oils and bath bombs right away
- Wipe the bath dry after use in hard water areas
Wipe the bath dry after use where you can, and rinse off any bath products.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What a repair cannot fix
A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in New Wood
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Common questions in New Wood
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Do you come to New Wood?
We do. We send a technician to New Wood for every job, and the price is the same as everywhere else.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
What areas do you cover?
We work UK-wide, so New Wood is covered. Prices don’t change with location.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
