Staffordshire · England
Bath Re-enamelling for Kinver homes
Fixed-price bath re-enamelling in Kinver and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Stains that won’t shift
About our bath re-enamelling in Kinver
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Whether it’s brown or grey marks that don’t clean off and several chips and rust patches, we can typically put it right, on Victorian roll-tops, cast iron baths and pressed steel baths alike.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Kinver (DY7)
- Area hub
- Staffordshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
What affects the price in Kinver
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Unusual colours or finishes
- How many areas need work
- What kind of damage it is
- Whether old repairs or coatings need taking off
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- Natural light rather than flash
- Details of any past repairs
- Where you are, by postcode
- A coin beside the damage so we can judge size
Most clients in Kinver get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Signs you need bath re-enamelling in Kinver
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Clients generally contact us about:
- A period or roll-top bath worth keeping
- Wear marks under the taps
- An outdated colour you’d like to change
- A coating lifting around the plughole
Questions to ask before booking
- If travel is included in the price
- How the colour is matched
- The length of the guarantee and what it covers
- How long it needs to cure
Kinver questions
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Are there extra charges for Kinver?
There’s no separate call-out charge. Your fixed price includes everything.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What happens once I’ve sent pictures?
You will get a fixed quote back, generally with dates to choose from. You are under no obligation.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
How to look after the repair
How the surface is treated afterwards matters:
- Wipe the bath dry after use in hard water areas
- Don’t use the bath until it has fully cured
- Avoid suction-cup mats
- Use washing-up liquid and a soft cloth
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
How it works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- Fixed prices from your pictures
- Rooms protected and left tidy
Read our prices page or resurfacing vs replacement cost guide.
About Kinver
Kinver is about 4 miles west of Stourbridge, in Staffordshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We work in all 512 towns and villages across Staffordshire. You can also see our page for Birmingham, about 14 miles away.
Postcode districts we cover here: DY7. Whether you live on High Street, Church Road and Foster Crescent or a nearby road, a technician can come to you. If you are just outside Kinver, we cover Dunsley (1 mile east), Whittington (1 mile south-east), Compton (2 miles north-west), Caunsall (2 miles south) and Blakeshall (2 miles south). Within a short drive, we also cover Wombourne (6 miles north), Codsall (12 miles north), Bilbrook (12 miles north), Bratch (6 miles north) and Claverley (7 miles north-west).
Around Kinver
Locally, our jobs take us to homes close to The Royal Exchange pub, Kinver High School and Sixth Form and St Peter's Church and the streets around them. The closest station to Kinver is Stourbridge Town station, roughly 3.9 miles east of the centre. Further afield, we also cover the area around Stourton Castle (1.3 miles north-east) and Red House Glass Cone (3.7 miles north-east). The countryside around Kinver includes Kinver Edge and Stourton Pit.
Nearby places to Kinver
More services for Kinver
When a repair isn’t the answer
A repair is not right for every job, for example:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
Send us pictures and we will tell you honestly.
What we work on
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
