Kent · England
Bath re-enamelling & resurfacing in Newchurch, Kent
Bath re-enamelling across Newchurch and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A roll-top that is seen better days
Bath re-enamelling in Newchurch without replacing anything
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Common call-outs are for staining under the taps and around the waste and lots of chips and rust spots, on Victorian roll-tops, cast iron baths and basins & shower trays.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Newchurch (TN29)
- Region
- Kent
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Signs you need bath re-enamelling in Newchurch
Often the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
It’s worth getting a quote if you see:
- Staining under the taps and around the waste
- Chips and rust in more than one place
- A coating lifting around the plughole
- Worn patches where water runs and sits
Before booking anyone
- How the room is protected while they work
- What prep work is covered
- Whether a trained technician does the job
- How to look after the finish
Should you replace it?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why book with us
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
Take a look at our full price list and guide to resurfacing and replacement costs.
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a full day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Clear the area around the damage
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
Getting a price
If you are in Newchurch and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
When a repair isn’t the answer
It helps to know what we cannot do too:
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
Send us photos and we’ll tell you honestly.
What we work on
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Newchurch and the surrounding area
Newchurch is about 7 miles west of Hythe, in Kent. Wherever you are in the TN29 postcode area, a technician comes to you. Newchurch is one of 922 places in Kent where we work. We work right across the region, from Newchurch to London (about 54 miles away).
Postcode districts we cover here: TN29. You’ll find streets such as Links Close, Church View and Patchways. We also cover the places around Newchurch: St Mary in the Marsh (2 miles south), Postling Green (3 miles north-east), Bonnington (3 miles north), Burmarsh (3 miles east) and St Mary's Bay (3 miles south-east). Further out, we also cover Ashford (7 miles north), Folkestone (11 miles east), Hythe (7 miles east), Hawkinge (11 miles north-east), Tenterden (10 miles west) and Cheriton (10 miles east).
Landmarks near Newchurch
In Newchurch, that means homes near The Black Bull Public House and Church of St Peter and St Paul and the streets around them. The closest station to Newchurch is Ham Street station, about 3.6 miles north-west of the centre. Nearby you’ll also find Romney 'castle' (3.8 miles south) and Brenzett Aeronautical Museum (3.8 miles south-west). For a walk, there’s Orlestone Forest.
Places near Newchurch
Also in Newchurch
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What affects the price in Newchurch
Prices start from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- Doing more than one item at once
- What kind of damage it is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- Something in shot to show the size
- A photo taken from further back
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Keep toiletries on a shelf rather than in the bath
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Your questions about bath re-enamelling in Newchurch
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What areas do you cover?
All of Kent, and the rest of the UK. Travel is included in the price.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
About our accreditations · Every repair comes with a one-year guarantee.
